Results 1 to 5 of 5

Thread: Doser 2 Head sticking

  1. #1
    Join Date
    20.05.2017
    Posts
    63

    Default Doser 2 Head sticking

    One of the heads on my Doser 2 slave connected to P3ex is not working properly, it seems to stick at times and sometimes does not work at all
    I swapped the dosing heads around and the head is working fine in another slot.
    I have kindof come to the conclusion that the motor in the doser 2
    Is there anything else I should be doing before ordering a replacement motor?

  2. #2
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    Hi,

    Just to make sure, are we talking about the Doser 2.0 or 2.1?

    If you remove the head, can you manually run this motor and see if the motor shaft spins without interruption?

  3. #3
    Join Date
    20.05.2017
    Posts
    63

    Default

    Doser 2.0
    When I take the head off - it spins. But with the head, it spins once in a while but looks like catching.
    I tried changing the head from the adjacent ones and the same result.

    Sent from my SM-N950F using Tapatalk

  4. #4
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    Depending on the overall use and age of the motor, a replacement may be the best option.

  5. #5
    Join Date
    20.05.2017
    Posts
    63

    Default

    Ordered replacement motors. Toim a while to come, in the mean time, I swapped the motors and gave the head a nice clean . Vola, it all works. The replacement doser head and motor are spares

    Sent from my SM-N950F using Tapatalk

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •