Results 1 to 9 of 9

Thread: Problem with stirrer

  1. #1
    Join Date
    25.10.2018
    Posts
    25

    Default Problem with stirrer

    Hi alls,
    I'm not able to set my new stirrer. I try several ways but it not works.

    I have 2 Doso slave. The first one is a 3 head, for ca,kh amg mg. The second one is a four head and i use itfor kh director. In this way i have the last Doso head(7) Free.

    I' m not able to set profilux.
    I set stirrer 8, with Doso command. 7 Doso ad command.. 1 cicle/day. 1 minut before command and 45 second ad duration...

    Any suggestion?
    Thanks



    Inviato dal mio SM-N950F utilizzando Tapatalk

  2. #2
    Join Date
    13.08.2010
    Posts
    4,150

    Default

    Did you choose the right model in the settings of the Stirrer?
    stirrer Model.PNG

    regards Pit

  3. #3
    Join Date
    25.10.2018
    Posts
    25

    Default

    I haven't this column in my gcc.. have you got master or slave units?

    Inviato dal mio SM-N950F utilizzando Tapatalk

  4. #4
    Join Date
    25.10.2018
    Posts
    25

    Default

    This evening i'll try to update my profilux.

    Inviato dal mio SM-N950F utilizzando Tapatalk

  5. #5
    Join Date
    25.10.2018
    Posts
    25

    Default

    I tried to update , Now i'm at 7.15 but i can not choose the stirrer model yet...

    Any suggestion?

    Inviato dal mio SM-N950F utilizzando Tapatalk

  6. #6
    Join Date
    13.08.2010
    Posts
    4,150

    Default

    Which version does your GHLContolCenter have? Have you tried the expert mode?

    Regards Pit

  7. #7
    Join Date
    25.10.2018
    Posts
    25

    Default

    The version is 1.1.1.7 date : 19.7.2018
    I use Expert mode on gcc

    Inviato dal mio SM-N950F utilizzando Tapatalk
    Last edited by rocco bellafante; 18.01.2019 at 21:12.

  8. #8
    Join Date
    13.08.2010
    Posts
    4,150

    Default

    Please use the Firmware V716 and the GHLControlCenter_V1118
    Download

    New in V1.1.1.8:

    Support for newer magnetic stirrer model (V2) for ProfiLux 3 (with included firmware 6.38), ProfiLux 4 (with included firmware 7.16) and GHL Doser 2/2.1/Maxi Slave/Standalone (with included firmware 1.30)

    Sockets/switch channel Operating hour meter can be set for ProfiLux 4

    regards Pit

  9. #9
    Join Date
    25.10.2018
    Posts
    25

    Default

    Thanks a lot, some minutes ago i find in the forum a specific post. I update the gcc to 1.1.1.8 and then there is the column with model 1 or 2. Thanks a lot. Now it runs

    Inviato dal mio SM-N950F utilizzando Tapatalk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •