Results 1 to 2 of 2

Thread: I take upgrade profilux to 6.39 and I'M upgrade POWERBAR 6D and profilux touch

  1. #1
    Join Date
    31.12.2018
    Posts
    10

    Default I take upgrade profilux to 6.39 and I'M upgrade POWERBAR 6D and profilux touch

    I take upgrade profilux to 6.39
    and I'M upgrade POWERBAR 6D and profilux touch

    after upgrade profilux touch - pub don't work in profilux.
    pub system reset dont take affect.

    profilux don't see devices and on poerrbar don't light com.
    Help please.profilux touch.jpg

  2. #2
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    Hello Nikolas,

    When you did the PAB-device update (P Touch / Powerbar), did you disconnect all other PAB devices before proceeding with a single PAB-device update?

    It looks like the firmware will need to be reloaded onto each device.

    Please do the following:
    1. Disconnect all PAB-devices and connect ONLY the Powerbar6-D to the P3. Powerbar should be powered ON.
    2. Follow the steps shown here: https://youtu.be/dhZKY055qhc
    3. When you get to 2:46 in the video, follow the EMERGENCY UPDATE steps as shown, then click OK. That will push the FW to a PAB-device which is having issues.

    Once that is done, you should be able to assign the device to your P3.

    Repeat the same steps for the ProfiLux Touch, making sure ONLY the touch is connected before you being the update.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •