Zeige Ergebnis 1 bis 2 von 2

Thema: I take upgrade profilux to 6.39 and I'M upgrade POWERBAR 6D and profilux touch

  1. #1
    Registriert seit
    31.12.2018
    Beiträge
    4

    Standard I take upgrade profilux to 6.39 and I'M upgrade POWERBAR 6D and profilux touch

    I take upgrade profilux to 6.39
    and I'M upgrade POWERBAR 6D and profilux touch

    after upgrade profilux touch - pub don't work in profilux.
    pub system reset dont take affect.

    profilux don't see devices and on poerrbar don't light com.
    Help please.profilux touch.jpg

  2. #2
    Registriert seit
    27.05.2015
    Beiträge
    1.480

    Standard

    Hello Nikolas,

    When you did the PAB-device update (P Touch / Powerbar), did you disconnect all other PAB devices before proceeding with a single PAB-device update?

    It looks like the firmware will need to be reloaded onto each device.

    Please do the following:
    1. Disconnect all PAB-devices and connect ONLY the Powerbar6-D to the P3. Powerbar should be powered ON.
    2. Follow the steps shown here: https://youtu.be/dhZKY055qhc
    3. When you get to 2:46 in the video, follow the EMERGENCY UPDATE steps as shown, then click OK. That will push the FW to a PAB-device which is having issues.

    Once that is done, you should be able to assign the device to your P3.

    Repeat the same steps for the ProfiLux Touch, making sure ONLY the touch is connected before you being the update.

Forumregeln

  • Es ist dir nicht erlaubt, neue Themen zu verfassen.
  • Es ist dir nicht erlaubt, auf Beiträge zu antworten.
  • Es ist dir nicht erlaubt, Anhänge hochzuladen.
  • Es ist dir nicht erlaubt, deine Beiträge zu bearbeiten.
  •