Results 1 to 6 of 6

Thread: How to save a running lighting project?

  1. #1
    Join Date
    17.11.2015
    Location
    Lviv
    Posts
    11

    Default How to save a running lighting project?

    Dear Colleagues,

    I’m using two Mitras LX 6100 HV. All light changes I’m saving directly to the
    lamps.

    How can I save/copy a running lighting project from my lamps to the file on my PC?

  2. #2
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    1. Connect to your device and open Light Composer
    2. Click the light composer tab at the top of the screen.
    3. Click Save, name the saved file and select where you wish to save the file on your computer.

  3. #3
    Join Date
    17.11.2015
    Location
    Lviv
    Posts
    11

    Default

    Thank you.
    There is no Light composer in the top tab.
    Only at the left. There is no Save command.
    Here some photos of my GHL Control Center.
    IMG_8842.jpgIMG_8843.jpg

  4. #4
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    The Light composer tab will show once you select the project you wish to load.

    The on-board settings running on the lights do not sync over to GCC.

    If you need to create a new project, use one of the existing templates as a starting point. Once you're satisfied with the light schedule, you can click the Light composer tab and save this project.

  5. #5
    Join Date
    17.11.2015
    Location
    Lviv
    Posts
    11

    Default

    Thanks.

    But I’ve made all settings and adjustments in my lamp long time ago. I’m quite happy with everything. So, now I would like to save all these settings as a project and share it with my friend with the same lamp.

    Is it possible?

  6. #6
    Join Date
    04.11.2015
    Posts
    1,062

    Default

    Quote Originally Posted by ivanser View Post
    Thanks.

    But I’ve made all settings and adjustments in my lamp long time ago. I’m quite happy with everything. So, now I would like to save all these settings as a project and share it with my friend with the same lamp.

    Is it possible?
    0.jpg

    Yes, this is possible. When you have opened the LightComposer windows, the upper menu will show a entry called 'Project'.
    Select it and save your project to a file.
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •