Results 1 to 3 of 3

Thread: Conductivity measurment 0 -> 5 mS

  1. #1
    Join Date
    25.02.2010
    Posts
    8

    Lächeln Conductivity measurment 0 -> 5 mS

    Hi,


    up to now, the condF can mesure EC within the [0 - 2 mS] range.


    I would need a [0 - 5 mS] range, with 0.01 mS accuracy.

    How can I achieve this with Profilux ?

  2. #2
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    Hello,

    Conductivity probes that are used for measuring freshwater do not measure in mS.
    If the probe is actually set to Cond (F), it will only provide values in uS.

    Information on the probe ranges and resolution can be found on page 43 of our ProfiLux 4 Programming Guide.

  3. #3
    Join Date
    25.02.2010
    Posts
    8

    Default

    You are right, I made a mistake.

    The question is rather simple : how can I measure in the range [0 - 5] mS/cm with a 0.01 mS/cm accuracy ?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •