Results 1 to 7 of 7

Thread: PowerHub 6D - no current

  1. #1
    Join Date
    20.12.2018
    Posts
    11

    Default PowerHub 6D - no current

    Hello
    I tried to make my powerbar but I don't have power on the output switch.

    I have :
    - assign devices in Profilux4 system
    - my switch is "always on"

    What more must be done
    thanks

    Powerhub.png
    Switch channels.png
    Powerhub 6D.jpg

  2. #2
    Join Date
    13.08.2010
    Posts
    4,150

    Default

    Open the function with a double click and adjust it to your desired functions.

    regards Pit

  3. #3
    Join Date
    20.12.2018
    Posts
    11

    Default

    still does not work, I tried ...

  4. #4
    Join Date
    13.08.2010
    Posts
    4,150

    Default

    Did you also assign everything under "assign devices"?

    regards pit

  5. #5
    Join Date
    20.12.2018
    Posts
    11

    Default

    I took pictures of what I set

    image.png
    image (1).png
    image (2).png
    image (3).png

  6. #6
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    Check your power connections going to the connected equipment.

    The ProfiLux is showing that the device was correctly assigned.
    The PowerHub is also showing that it is sending power to those 6 outlets. See the RED lights are ON. That means the outlets are getting power.

  7. #7
    Join Date
    20.12.2018
    Posts
    11

    Default

    I have already tested the inputs and outputs
    . I will contact the SAV ...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •