Results 1 to 2 of 2

Thread: Can't find where to adjust sensor graph range or to display them aside from on touch

  1. #1
    Join Date
    14.02.2013
    Location
    Saskatoon
    Posts
    80

    Default Can't find where to adjust sensor graph range or to display them aside from on touch

    Hello All,

    First off, I tried to download the Profilux Touch manual and this is what I see:Screen Shot 2018-11-29 at 1.19.19 PM.jpg

    Here is what my GCC shows when I connect to the Profilux3.1ex N (up to date FW) and click on Profilux Touch (1.06 FW):IMG_9175.jpg

    From looking at others posts it looks like there should be a lower box that shows sensors and max/min ranges, why can't I see that information? Any help would be appreciated, I'm trying to dial in my redox and an ozone generator and I'd like to see what my numbers hit over night. But when I look at the graph on the touch its range spans a thousand units.

    Thanks

  2. #2
    Join Date
    27.05.2015
    Posts
    2,486

    Default

    Enable EXPERT MODE.

    This can be found in the VIEW tab at the top of the GCC screen.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •