Connect via USB or via USB to serial adapter works in the same way:
- ProfiLux is running and the init messages on the display are gone
- Plug in the USB cable or USB to serial adapter to the ProfiLux
- connect the cable to your PCs USB Port
- figure out the port number of the USB COM in the device manager - don't change
- Make a "New..." connection with
Name: USB - for example
Type of connection: RS232/USB
COM: port number of USB COM
Baud: 9600
Device address: 1
...and "Save"
Now you should be able to connect to the ProfiLux
A firmware update is possible via ProfiLux3 onboard RS232 port or onboard USB port. Only if you are forced to use the FR flasher software after a broken update you must use the RS232 port.
Hint: Not every USB to serial Adapter works with the ProfiLux
Bookmarks