Results 1 to 4 of 4

Thread: Problem on dimmable socket

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    25.10.2018
    Posts
    25

    Default Problem on dimmable socket

    Hi everybody,

    i have 2 5.1 powerbars connected to my p4 and i use the dimmable socket of each ones to control light bars.

    white channel works good.
    blue one, setted in similar way, this morningruns while is setted to cut off.

    on powerbar, the socket led is swiched off
    in GCC the socket is switched off.

    but the socket has electric exit.

    i try to reset power bar whit red button.

    the same.

    this is the first day system runs. it is new.
    can somebody help me?

  2. #2
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    Hello Rocco,

    Just to be sure I'm understanding your setup correctly, you have 2 Mitras Lightbars and each are connected to the S5 socket?

    The S5 socket on one of your powerbars stay ON even though it is switched OFF in GCC?

  3. #3
    Join Date
    25.10.2018
    Posts
    25

    Default

    Hi Vinny.
    I haven't mitras lightbars,yet.
    I have aquatlantis lightbars.

    The White one in on a s5 socket, At 40%
    The blu ones were on the second s5 socket , in another powerbar.

  4. #4
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    Hi,

    If the amperage rating of these light bars exceed 3A, even while dimmed, the socket can get damaged.

    Please open a support ticket so we can assist you further with your Powerbar 5.1.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •