Seite 3 von 4 ErsteErste 1234 LetzteLetzte
Zeige Ergebnis 21 bis 30 von 35

Thema: Issue with Expansionbox 2 and digital temp probe

  1. #21
    Registriert seit
    25.11.2017
    Ort
    Louisville
    Beiträge
    38

    Standard

    Sorry to hear that you are sick. Wishing you a speedy recovery! Do you have a conductivity probe connected to any of the expansion box's? I connected a conductivity probe today and it gives a constant alarm even though it is well within range. Even when I turn the probe alarm off, the alarm continues? Not sure if it is something related or something else? Thanks Lasse!

  2. #22
    Registriert seit
    24.01.2011
    Ort
    Bohus, Sweden
    Beiträge
    175

    Standard

    I recover rather fast - it was a surgery in the stomach and I´m home from the hospital now - but my body is used of this and recover fast. it was the number 10 since 1970 and the seventh the last 20 years.

    Probably does the salinity probe send out alarm because it is over the measurement limit. Just take it out from the BNC and have the probe active in the GCC. The measurement should show a value near zero. Have the probe in the air and connect the bnc contact firmly. The measurement should be nearly the same as before. If it work and you read near zero - you can start the calibration process - and it should work when you have done that.

    Sincerely Lasse

  3. #23
    Registriert seit
    01.06.2018
    Beiträge
    21

    Standard

    Was this resolved? If so, please share your resolution.

    I seem to have the same Temp Sensor issue with a P4 and Expansion Box 2. It just errors out randomly, sometimes even reporting temp over 120F. It's a brand new sensor. I do have some other electronics/cables close, so maybe I need to tweak the "Signal Filter" ? It's the only thing I can think of, right now it's on 5 (medium).

    P4 Firmware: 7.23
    Expansion Box 2 Firmware: 2.05

  4. #24
    Registriert seit
    30.03.2011
    Ort
    helsingborg
    Beiträge
    177

    Standard

    No its still there. I have the same issue. Random 40c. I get an e-mail then when i check its ok.

    Skickat från min J9110 via Tapatalk

  5. #25
    Registriert seit
    01.06.2018
    Beiträge
    21

    Standard

    Zitat Zitat von faltaren Beitrag anzeigen
    No its still there. I have the same issue. Random 40c. I get an e-mail then when i check its ok.

    Skickat från min J9110 via Tapatalk
    Same issue. Random Alarm text notification. But then when I check the app it’s fine.

  6. #26
    Registriert seit
    27.05.2015
    Beiträge
    1.597

    Standard

    @faltaren
    @brianmsu80

    Have you created a support ticket so we can help you with this?
    If not, please do so.

  7. #27
    Registriert seit
    01.06.2018
    Beiträge
    21

    Standard

    Just did. Thanks

  8. #28
    Registriert seit
    21.06.2011
    Ort
    South Florida
    Beiträge
    802

    Standard

    Same issue here.


    Sent from my iPhone using Tapatalk

  9. #29
    Registriert seit
    10.10.2013
    Beiträge
    343

    Standard

    same

  10. #30
    Registriert seit
    24.01.2011
    Ort
    Bohus, Sweden
    Beiträge
    175

    Standard

    @Vinny - Have had an open ticket of this for many months. I even get this from redox electrodes attached to the expbox 2

    Sincerely Lasse

Forumregeln

  • Es ist dir nicht erlaubt, neue Themen zu verfassen.
  • Es ist dir nicht erlaubt, auf Beiträge zu antworten.
  • Es ist dir nicht erlaubt, Anhänge hochzuladen.
  • Es ist dir nicht erlaubt, deine Beiträge zu bearbeiten.
  •