Results 1 to 2 of 2

Thread: Cry For Help - Doser 2 won't run on speed 3 on all 4 pumps for KHD

  1. #1
    Join Date
    12.06.2016
    Posts
    2

    Ausrufezeichen Cry For Help - Doser 2 won't run on speed 3 on all 4 pumps for KHD

    Evening guys

    Removed my P4, KHD & slave 4 pump doser this evening to install a new return. Plugged everything back in and now none of the pumps on the slave doser will work on speed 3 - they just stick. I've had a couple of issues recently with the dosing tube detaching itself from between the KHD waste output to the pump head. I am aware of not allowing the vent tubing or waste to go beneath the container so that isn't causing the issue, ive always just re-attached and carried on.


    I've dismantled all 4 pump heads to check and tried to spin the spindle without any rollers or tubing in, they still all stick. I really hope this is something simple as I am going away tomorrow and wanting the peace of mind.

    PLEASE HELP - YOUR MY ONLY HOPE!!

  2. #2
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    Unassign the doser from the PAB system, then reassign and adjust pump speed for each head.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •