Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: Wifi firmware update

  1. #1
    Join Date
    18.09.2013
    Posts
    51

    Default Wifi firmware update

    Hi all,
    As the access through the myghl cloud is no more possible, I have tried to update the wifi firmware. The current I have is 6311 which I understand is too old (the minimum requirement is to have the 6512 version).
    I have tried to proceed, as it is explained, using the "Wifi Firmware Update Tool".
    After refreshing the port list, the COM7 has been identified and recognized by the tool. I have pressed "start" and immediately a window has open, saying that a non managed exception has occurred and that the access to the COM7 port has been denied. If I press "continue", the P4 switch to "transparent mode" but nothing more happen.
    Can you please help me ?
    Thanks

  2. #2
    Join Date
    04.11.2015
    Posts
    1,062

    Default

    Hello,

    select COM7 and press identify device. This should show PL4 in the textbox.
    Then press start, which opens the command prompt and starting the flash procedure.

    Can you execute the file esptool.exe in the 'bin'-subdirectory without seeing this error?
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  3. #3
    Join Date
    18.09.2013
    Posts
    51

    Default

    when I press "Identify connected GHL Device" it shows exactly the same messageUNADJUSTEDNONRAW_thumb_288e.jpg

  4. #4
    Join Date
    04.11.2015
    Posts
    1,062

    Default

    If you click on the devicelist dropdown, there are most likely more COM-ports listed.
    You must find out which one is connected to your ProfiLux4.

    After selecting the right port and clicking 'Identify GHL device...', PL4 must be shown and you can proceed.
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  5. #5
    Join Date
    18.09.2013
    Posts
    51

    Default

    No, COM7 is the right one. I have already checked the device list and there isn't other option.

  6. #6
    Join Date
    04.11.2015
    Posts
    1,062

    Default

    Make also sure GHL Control Center is not connected to ProfiLux4. The comport must be exclusively accessible by the WiFi-Update-Tool.
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  7. #7
    Join Date
    18.09.2013
    Posts
    51

    Default

    Still doesn't work, even after disconecting the P4.
    Attached is the screen shot showing the updating tool and the error message. Screen shot updating wifi.jpg
    Below is the full message that I get by clicking on "détails" :

    Consultez la fin de ce message pour plus de détails sur l'appel du débogage
    juste-à-temps (JIT) à la place de cette boîte de dialogue.

    ************** Texte de l'exception **************
    System.ComponentModel.Win32Exception (0x80004005): Le fichier spécifié est introuvable
    à System.Diagnostics.Process.StartWithShellExecuteEx (ProcessStartInfo startInfo)
    à System.Diagnostics.Process.Start()
    à System.Diagnostics.Process.Start(ProcessStartInfo startInfo)
    à A.C.a()
    à A.B.A(Object , EventArgs )
    à System.Windows.Forms.Control.OnClick(EventArgs e)
    à System.Windows.Forms.Button.OnClick(EventArgs e)
    à System.Windows.Forms.Button.OnMouseUp(MouseEventAr gs mevent)
    à System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
    à System.Windows.Forms.Control.WndProc(Message& m)
    à System.Windows.Forms.ButtonBase.WndProc(Message& m)
    à System.Windows.Forms.Button.WndProc(Message& m)
    à System.Windows.Forms.Control.ControlNativeWindow.O nMessage(Message& m)
    à System.Windows.Forms.Control.ControlNativeWindow.W ndProc(Message& m)
    à System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


    ************** Assemblys chargés **************
    mscorlib
    Version de l'assembly*: 4.0.0.0
    Version Win32*: 4.7.2600.0 built by: NET471REL1LAST
    CodeBase*: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
    ----------------------------------------
    WiFi_FirmwareUpdateTool
    Version de l'assembly*: 1.0.0.0
    Version Win32*: 1.0.0.0
    CodeBase*: file:///C:/Users/cdevr/AppData/Local/Temp/Temp1_WiFi-Module-ESP-Update.zip/WiFi-Firmware-Update-Tool/WiFi-Firmware-Update-Tool/WiFi_FirmwareUpdateTool.exe
    ----------------------------------------
    System.Windows.Forms
    Version de l'assembly*: 4.0.0.0
    Version Win32*: 4.7.2556.0 built by: NET471REL1
    CodeBase*: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
    ----------------------------------------
    System
    Version de l'assembly*: 4.0.0.0
    Version Win32*: 4.7.2556.0 built by: NET471REL1
    CodeBase*: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
    ----------------------------------------
    System.Drawing
    Version de l'assembly*: 4.0.0.0
    Version Win32*: 4.7.2556.0 built by: NET471REL1
    CodeBase*: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
    ----------------------------------------
    System.Configuration
    Version de l'assembly*: 4.0.0.0
    Version Win32*: 4.7.2556.0 built by: NET471REL1
    CodeBase*: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
    ----------------------------------------
    System.Core
    Version de l'assembly*: 4.0.0.0
    Version Win32*: 4.7.2600.0 built by: NET471REL1LAST
    CodeBase*: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
    ----------------------------------------
    System.Xml
    Version de l'assembly*: 4.0.0.0
    Version Win32*: 4.7.2612.0 built by: NET471REL1LAST_B
    CodeBase*: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
    ----------------------------------------
    Accessibility
    Version de l'assembly*: 4.0.0.0
    Version Win32*: 4.7.2556.0 built by: NET471REL1
    CodeBase*: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Accessibility/v4.0_4.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
    ----------------------------------------
    System.Windows.Forms.resources
    Version de l'assembly*: 4.0.0.0
    Version Win32*: 4.7.2556.0 built by: NET471REL1
    CodeBase*: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms.resources/v4.0_4.0.0.0_fr_b77a5c561934e089/System.Windows.Forms.resources.dll
    ----------------------------------------
    mscorlib.resources
    Version de l'assembly*: 4.0.0.0
    Version Win32*: 4.7.2556.0 built by: NET471REL1
    CodeBase*: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/mscorlib.resources/v4.0_4.0.0.0_fr_b77a5c561934e089/mscorlib.resources.dll
    ----------------------------------------

    ************** Débogage JIT **************
    Pour activer le débogage juste-à-temps (JIT), le fichier de configuration pour cette
    application ou cet ordinateur (machine.config) doit avoir la valeur
    jitDebugging définie dans la section system.windows.forms.
    L'application doit également être compilée avec le débogage
    activé.

    Par exemple*:

    <configuration>
    <system.windows.forms jitDebugging="true" />
    </configuration>

    Lorsque le débogage juste-à-temps est activé, les exceptions non gérées
    seront envoyées au débogueur JIT inscrit sur l'ordinateur
    plutôt que d'être gérées par cette boîte de dialogue.

  8. #8
    Join Date
    04.11.2015
    Posts
    1,062

    Default

    Hello,

    there is a chance your antivirus program is too aggressive and removed the exe file below the folder 'bin', which should contain 'esptool.exe'.
    Check this and if not found disable your antivirus progam and unpackage the downloaded tool again.
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  9. #9
    Join Date
    18.09.2013
    Posts
    51

    Default

    Unfortunately, it doesn't change anything. I have desactivated everything and it is still the same message!!!

  10. #10
    Join Date
    04.11.2015
    Posts
    1,062

    Default

    Does the file 'esptool.exe' in the subfolder 'bin' exist?
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •