Seite 2 von 2 ErsteErste 12
Zeige Ergebnis 11 bis 20 von 20

Thema: Charts not up to date.

  1. #11
    Registriert seit
    07.03.2017
    Beiträge
    17

    Standard

    I am having the same issue...

    This is happening since some time now. Running actually the latest versions of GCC 7.15 or Webinterface 1.0.7 but no changes.

    I am actually located in FRANCE and Profilux is set to UTC+2 and charts are not updated since 6 hours ( see attachments) even when selecting the chart by hour.

    Chart.jpg
    settings.jpg
    Geändert von Kodo28 (10.08.2018 um 12:37 Uhr)

  2. #12
    Registriert seit
    27.05.2015
    Beiträge
    1.230

    Standard

    If you go into your measurement settings, how often do you have the ProfiLux set to record measurements?

  3. #13
    Registriert seit
    07.03.2017
    Beiträge
    17

    Standard

    Hi Vinny,

    The setting for the recording measurements is set to 5 minutes delay.

  4. #14
    Registriert seit
    07.03.2017
    Beiträge
    17

    Standard

    Also the charts are not showing consistent timing points.

    example :

    05Aug showing 11:26AM next point is shown at 11:31AM (5mn) then next one only at 11:41AM and the next one later at 12:01PM and the next one even later (1hour delay) at 01:01PM...

    I would expect to have reading points all the 5 minutes all time and not delayed like showing on the graph.

    1.jpg2.jpg3.jpg5.jpg6.jpg
    Geändert von Kodo28 (10.08.2018 um 13:15 Uhr)

  5. #15
    Registriert seit
    27.05.2015
    Beiträge
    1.230

    Standard

    Please change the measurement intervals to 1 hour and let's see if the times are still off or not consistent.

  6. #16
    Registriert seit
    27.07.2012
    Beiträge
    49

    Standard

    I want to know if the chart is only for P4?I can't see it in my P3

  7. #17
    Registriert seit
    09.11.2017
    Beiträge
    282

    Standard

    Zitat Zitat von ss162400 Beitrag anzeigen
    I want to know if the chart is only for P4?I can't see it in my P3
    Charts are not available for ProfiLux 3 and Doser 2/Maxi at the moment, but we're working on it.
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  8. #18
    Registriert seit
    07.03.2017
    Beiträge
    17

    Standard

    Zitat Zitat von Vinny Beitrag anzeigen
    Please change the measurement intervals to 1 hour and let's see if the times are still off or not consistent.
    Hi Vinny,

    I tested 15mn, 30mn and 1 hour intervals, charts are still off of 8 hours and inconsistent. By changing, I got even worst discrepancies.

    Last point was at 03:00AM and actually time is 11:29AM

    I found also that the charts from MyGHL are not giving the same times as the web interface ones.
    Geändert von Kodo28 (13.08.2018 um 10:41 Uhr)

  9. #19
    Registriert seit
    27.07.2012
    Beiträge
    49

    Standard

    Zitat Zitat von Thilo Beitrag anzeigen
    Charts are not available for ProfiLux 3 and Doser 2/Maxi at the moment, but we're working on it.
    Thank you very much!

  10. #20
    Registriert seit
    30.06.2018
    Beiträge
    14

    Standard

    Zitat Zitat von Vinny Beitrag anzeigen
    Please change the measurement intervals to 1 hour and let's see if the times are still off or not consistent.
    My charts are not up to date whatever I seem to do but intervals seem ok at 1 hour.
    From looking back at my charts on 8th August there’s some inconsistencies at 30 minutes.
    Temp and pH was missed at 0349,0449 and 0549 hours.
    Redox was read at 0319,0349,0419,0449,0519 and 0549 hours

Forumregeln

  • Es ist dir nicht erlaubt, neue Themen zu verfassen.
  • Es ist dir nicht erlaubt, auf Beiträge zu antworten.
  • Es ist dir nicht erlaubt, Anhänge hochzuladen.
  • Es ist dir nicht erlaubt, deine Beiträge zu bearbeiten.
  •