Results 1 to 5 of 5

Thread: Version 5H error

  1. #1
    Join Date
    19.02.2009
    Location
    MANOTICK
    Posts
    866

    Ausrufezeichen Version 5H error

    Error in download over USB

    Message

    Flasherase wrong response error 69


    GHL ProfiLux Canada/USA Distribution and support

  2. #2
    Join Date
    19.02.2009
    Location
    MANOTICK
    Posts
    866

    Default

    If using flash tool over RS232 the download fails.

    if then you try to go back to previous version this fails at chip erase it just hangs.

    If I try again I get blank check aborted timed out

    Please advise?
    Last edited by aqua_digital; 07.01.2010 at 19:07.


    GHL ProfiLux Canada/USA Distribution and support

  3. #3
    Join Date
    19.02.2009
    Location
    MANOTICK
    Posts
    866

    Default

    got it back up and running only by reloading Macna firmware and using original download tool made available to Beta testers.

    Now running V5.0H on F/w and S/w
    Last edited by aqua_digital; 07.01.2010 at 19:30.


    GHL ProfiLux Canada/USA Distribution and support

  4. #4
    Join Date
    18.02.2009
    Location
    Kaiserslautern
    Posts
    7,710

    Ausrufezeichen Download of firmware P3 V5.00h!!! Read before update!

    I wrote it before but it seems it was not read from everyone:

    first update the firmware
    then update ProfiLuxControl to 5.0.0.5

    The update from from v5.00g to V5.00h is not possible with ProfiLuxControl 5.0.0.5!!! You must use ProfiLuxControl 5.0.0.4!
    Once ProfiLux has been updated to V5.00h ProfiLuxControl 5.0.0.5 can be used!

    If you did not follow these instructions then you will need a recovery with the Flash-FR tool!

  5. #5
    Join Date
    19.02.2009
    Location
    MANOTICK
    Posts
    866

    Default

    I cant locate these instructions please can you point to this for everyone.

    Thanks for your help


    GHL ProfiLux Canada/USA Distribution and support

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •