Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: first patch P4 cannot access through WIFI

  1. #1
    Join Date
    03.06.2018
    Posts
    7

    Ausrufezeichen first patch P4 cannot access through WIFI

    Bought the first patch P4 2 years ago.
    Set all the WIFI when I got it, but cannot access GCC through WIFI. I think you must work on the patch to fix that.
    And I got P3.1 working very well. But after 2 year now, when I use GCC 1113 and update to the newest firmware and WIFI firmware.
    It still cannot work, no choice need to post and ask. But my P3.1 works perfect and event can access with newest App.

    I had set the device as 2, and WIFI setting as below.

    Please HELP!!! I have many friends around me kept ask me to teach them.
    wifi.jpg

  2. #2
    Join Date
    13.08.2010
    Posts
    4,150

    Default

    Hello
    The WIFI module must match the firmware of the Profilux, and GHL ControlCenter. First perform a firmware update on the WIFI module to version 9719. And make sure that the Profilux also has the current firmware.
    The current firmware can be found in the installation directory of the GHL ControlCenter

    regards Pit

  3. #3
    Join Date
    03.06.2018
    Posts
    7

    Default

    Hi Pit:

    Thank you for the quick reply. I think that is the problem. But when I try to upgrade WIFI module through Web server, "dial tcp 192.168.1.21:80: i/o timeout" appear. I was using firefox and I even cannot Ping the IP. Is there any other way to update the WIFI module?

    Regards Steve Chen

  4. #4
    Join Date
    13.08.2010
    Posts
    4,150

    Default

    Hi Steve
    You can do the update with USB. For this you need the WiFi_FirmwareUpdateTool. You can find it at
    C:\Program Files (x86)\GHLControlCenter_V1114\WiFi\WiFi-Firmware-Update-Tool

    Regards Pit

  5. #5
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    Based on what you have in your screenshot, the P4 is connected to your WiFi network...that's good.

    If you're having trouble connecting via WiFi using GHL Control Center, chances are it is a windows firewall issue.
    A recent windows 10 update made changes to Windows Firewall which blocks access to the P4 over WiFi on GCC.

    The fix to this is to open WINDOWS DEFENDER FIREWALL, click ALLOW AN APP THROUGH WINDOWS DEFENDER, select GCC, and click OK.

  6. #6
    Join Date
    03.06.2018
    Posts
    7

    Default

    Hi Pit:
    Use the tool is only able to update to 6619.

  7. #7
    Join Date
    03.06.2018
    Posts
    7

    Ausrufezeichen cannot access through WIFI

    Quote Originally Posted by Vinny View Post
    Based on what you have in your screenshot, the P4 is connected to your WiFi network...that's good.

    If you're having trouble connecting via WiFi using GHL Control Center, chances are it is a windows firewall issue.
    A recent windows 10 update made changes to Windows Firewall which blocks access to the P4 over WiFi on GCC.

    The fix to this is to open WINDOWS DEFENDER FIREWALL, click ALLOW AN APP THROUGH WINDOWS DEFENDER, select GCC, and click OK.
    Thank you for reply. Yes it can connect to WIFI, but PC cannot ping to it. And my GCC can connect to old P3.1 through WIFI and can Ping through. But P4 cannot connect even after I set allow in Firewall.

    Besides, the problem appear in GCC is very strange, after press connect, shows "Loading system information --Please wait", but after few second, it disappear suddenly and nothing happen after that. Please HELP!!!

  8. #8
    Join Date
    04.11.2015
    Posts
    1,062

    Default

    Hello,

    we can see in the screenshot, that your ProfiLux4 is connected to myGHL. This means,
    the network configuration is good.

    Double check the ip in GHL Control Center and keep in mind, that only one connection with GCC is possible at the same time.

    If you still have problems, we need detailled information of the error codes, in order to assist you with your setup.
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  9. #9
    Join Date
    03.06.2018
    Posts
    7

    Default

    Thank you reply.
    Yes, it shows able to connect and I am able to add, but when I try to open up.
    It just disconnected. as following:
    GHL Cloude.jpg

    And I check and double check, use the same setting like P3.1. Just GCC cannot connect,
    and there is no error msg. After Loading..... sign finished, nothing is happened. Usually will appear the content after that right?
    And I cannot access the web server too, but I can access P3.1 web server function.
    Pls. advice, or should I send back the device for your checking?

  10. #10
    Join Date
    04.11.2015
    Posts
    1,062

    Default

    Hello,

    reset the WiFi network settings. This can be easily done by triggering the 'Start WPS' function in GHL Control Center,
    which you therefore connect via USB connection.
    After this, restart ProfiLux 4 and reconfigure the networking settings.

    For DNS-IP-address use the google-DNS-server 8.8.8.8.
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •