Seite 1 von 2 12 LetzteLetzte
Zeige Ergebnis 1 bis 10 von 14

Thema: Bugs and suggestions

  1. #1
    Registriert seit
    05.01.2018
    Ort
    Aarhus C
    Beiträge
    64

    Standard Bugs and suggestions

    Hello GHL and folks


    After using some time on the GHL Control centre I found a couple of spelling errors and a couple of "bugs"
    I also have a suggestion or two...

    These bugs is not version specific, as they existed in the two previous versions as well.


    First and foremost, when the GCC open the tip of the day text gets crippled as I click the next button

    when first opened it looks like this :
    Tip of the day first.jpg

    And then, after clicking the next button :
    Tip of the day crippled.jpg

    Then there is something with the colour selections, both in the sensor setting and in the light composer

    Temperature :
    Sensor Color Bug - Temp.jpg

    Redox:
    Sensor Color Bug - Temp.jpg

    Same thing with PH and probably conductivity as well.

    I'll continue below, as I can only attach five pics pr. post
    Geändert von Mistahbrock (29.05.2018 um 14:40 Uhr)
    :ɔ) uʍop ǝpᴉsdn ƃuᴉɥʇʎɹǝʌǝ uɹnʇ oʇ pooƃ sᴉ sǝɯᴉʇǝɯoS

  2. #2
    Registriert seit
    05.01.2018
    Ort
    Aarhus C
    Beiträge
    64

    Standard

    --------------------------------------------
    Bugs and suggestions continued...
    --------------------------------------------

    Sorry for the messy sequence, I suck at multitasking and having both a graphic editor open and writing in here is a mess in my ADHD brain.

    Composer setup, more clutter and a little typo in the word spectrum (sprectrum) :
    Composer Spell and crippeled.jpg

    Then I have a suggestion to fill out the whole width for the graphic curves for the light composer:
    Composer suggestion.jpg


    And before even loading into the GCC, there is some clutter in the setup dialogue box:
    Crippeled Test in Setup.jpg


    --------------------------------------------
    I'll continue below
    --------------------------------------------
    Geändert von Mistahbrock (29.05.2018 um 15:17 Uhr)
    :ɔ) uʍop ǝpᴉsdn ƃuᴉɥʇʎɹǝʌǝ uɹnʇ oʇ pooƃ sᴉ sǝɯᴉʇǝɯoS

  3. #3
    Registriert seit
    05.01.2018
    Ort
    Aarhus C
    Beiträge
    64

    Standard More bugs and suggestions

    --------------------------------------------
    Bugs and suggestions continued...
    --------------------------------------------

    When editing the light composer, I find it a bit tedious to first open and edit on time, then close and open the next, etc.
    I suggest a next / previous function, also there is bit of clutter and another typo, sensitivity (sensivity) :
    Sensitivity spell and suggestion.jpg


    At the same page, I suggest a recieve illumination from the lightbars :
    Transmit illumination.png

    And speaking of lights, I bought a Mitras ligbar II and this is the singlemost best Buy I ever did, I can warmly recommend it for any aquarium head around the world, it really does make a big difference, plants grow so much better and everything simply look so great in this light

    --------------------------------------------
    I'll continue below
    --------------------------------------------
    Geändert von Mistahbrock (29.05.2018 um 22:58 Uhr)
    :ɔ) uʍop ǝpᴉsdn ƃuᴉɥʇʎɹǝʌǝ uɹnʇ oʇ pooƃ sᴉ sǝɯᴉʇǝɯoS

  4. #4
    Registriert seit
    05.01.2018
    Ort
    Aarhus C
    Beiträge
    64

    Standard

    --------------------------------------------
    Bugs and suggestions continued...
    --------------------------------------------

    Sorry there was some mess with the attachments, so here I paste some more

    Then there is a similar bug in the light composer, at load the colours are random, mostly dark / black and the description text I try to save in GHL control centre will disappear.

    When first loaded it looks like this :
    Illu. before Edit.jpg

    Then, after opening the colour selector and selecting a colour, it looks like this:
    Illu. after Edit.jpg

    It would like to suggest making the background colour dark for the light curves window, it would make more sense:
    Illumination Background Suggestion.jpg

    --------------------------------------------
    I'll continue below
    --------------------------------------------
    Geändert von Mistahbrock (29.05.2018 um 15:17 Uhr)
    :ɔ) uʍop ǝpᴉsdn ƃuᴉɥʇʎɹǝʌǝ uɹnʇ oʇ pooƃ sᴉ sǝɯᴉʇǝɯoS

  5. #5
    Registriert seit
    05.01.2018
    Ort
    Aarhus C
    Beiträge
    64

    Standard Bugs and suggestions

    --------------------------------------------
    Bugs and suggestions continued...
    --------------------------------------------

    Then there is some artefacts when loading the sensor tabs, at first load there is some options, calibration etc.
    but they disappears right after the page is loaded, is this the way it's supposed to work ?

    First, while loading :
    PH Loading.jpg

    And then after it's loaded:
    PH Loaded.jpg

    I am running the GHL Control centre from windows 7 64 bit, and I have tested it on both physical machines and a virtual box on Mac OS X 10.13
    It might be possible that the colour artefacts have something to do with the OS's I run, but I doubt it, more likely some coding routines, IMHO.

    Well, that was all for now, have a nice day and cheers, Brock
    Geändert von Mistahbrock (29.05.2018 um 15:12 Uhr)
    :ɔ) uʍop ǝpᴉsdn ƃuᴉɥʇʎɹǝʌǝ uɹnʇ oʇ pooƃ sᴉ sǝɯᴉʇǝɯoS

  6. #6
    Registriert seit
    27.05.2015
    Beiträge
    1.510

    Standard

    Thank you Brock for bringing this to our attention.

    We will notify the team to look into these tips for the next GCC versions.

  7. #7
    Registriert seit
    05.01.2018
    Ort
    Aarhus C
    Beiträge
    64

    Standard

    You are welcome Sir.
    Geändert von Mistahbrock (04.06.2018 um 09:55 Uhr)
    :ɔ) uʍop ǝpᴉsdn ƃuᴉɥʇʎɹǝʌǝ uɹnʇ oʇ pooƃ sᴉ sǝɯᴉʇǝɯoS

  8. #8
    Registriert seit
    24.04.2017
    Beiträge
    4

    Standard

    Charts incorrect displays on iMac 5k in full window mode

    5k.jpg

    to see right charts you need decrease size of window to half

    5k2.jpg
    Geändert von nadiaghl (11.06.2018 um 14:32 Uhr)

  9. #9
    Registriert seit
    05.01.2018
    Ort
    Aarhus C
    Beiträge
    64

    Standard

    A bit more clutter in the 0-10 volt interface tab

    And a suggestion

    0-10 volt interface.jpg


    Cheers, Brock
    :ɔ) uʍop ǝpᴉsdn ƃuᴉɥʇʎɹǝʌǝ uɹnʇ oʇ pooƃ sᴉ sǝɯᴉʇǝɯoS

  10. #10
    Registriert seit
    18.02.2009
    Ort
    Kaiserslautern
    Beiträge
    7.624

    Standard

    Thanks for the detailled report.

    I examined all points, these are my findings:

    a) "clutter": was not able to find any dialog with that issue. But I tested only on Win 8 and 10, maybe there is an issue with older Windows versions. I doubt I can solve it, with older libs we will see other issues with newer Windows versions.

    b) illumination graph color: yes, this was right. Only a 16 Bit value is stored in P4, but the color checker uses 24 Bit colors. Since red is the upper byte the red part disappeared. Has been solved, 24 Bit color is compressed before saving.

    c) "artefacts": couldn't find anything not in order. If you refer to the properties which are disabled during loading of the sensor: this is normal, the screen is shown depending on the sensor type and available features

    d) colors of sensors in graphs: couldn't find anything suspicious, maybe you can be a bit more specific?

    d) the one typo has been corrected

    check out today's new GCC update
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

Forumregeln

  • Es ist dir nicht erlaubt, neue Themen zu verfassen.
  • Es ist dir nicht erlaubt, auf Beiträge zu antworten.
  • Es ist dir nicht erlaubt, Anhänge hochzuladen.
  • Es ist dir nicht erlaubt, deine Beiträge zu bearbeiten.
  •