Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: P4 Webpage

  1. #1
    Join Date
    03.05.2012
    Posts
    227

    Default P4 Webpage

    Hi all,

    On my old Profilux 3.1 you could go to the web page and it had a really nice view. I had the Sensors tab always open on a iPad. Now with the P4 there isnt something like that (I use windows as well).
    What replaced it?

  2. #2
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    In order to view the new web interface, your P4 will need to be running on the newest P4 firmware, WiFi module firmware, and Web interface version. The web interface is a replica of what you see when you connect using the GHL Connect app.

    Download the newest version of GCC to bring your firmwares up to date. We have YT videos that walk you through how to do these steps.

  3. #3
    Join Date
    03.05.2012
    Posts
    227

    Default

    Quote Originally Posted by Vinny View Post
    In order to view the new web interface, your P4 will need to be running on the newest P4 firmware, WiFi module firmware, and Web interface version. The web interface is a replica of what you see when you connect using the GHL Connect app.

    Download the newest version of GCC to bring your firmwares up to date. We have YT videos that walk you through how to do these steps.

    I have 7.12 firmware running 1113 GCC. Should i have higher?

  4. #4
    Join Date
    03.05.2012
    Posts
    227

    Default

    Quote Originally Posted by Vinny View Post
    In order to view the new web interface, your P4 will need to be running on the newest P4 firmware, WiFi module firmware, and Web interface version. The web interface is a replica of what you see when you connect using the GHL Connect app.

    Download the newest version of GCC to bring your firmwares up to date. We have YT videos that walk you through how to do these steps.
    PS I have Web Version 1.02 and Wifi version: 6619

  5. #5
    Join Date
    04.11.2015
    Posts
    1,062

    Default

    Hello,

    we made a new webinterface available, which is bundled in the GHL Control Center or you can download from our page:
    https://www.aquariumcomputer.com/dow...ul-esp-update/

    This includes a manual for upgrading the webinterface via 'File transfers'.
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  6. #6
    Join Date
    03.05.2012
    Posts
    227

    Default

    Thank you sir will have a go at it! Thanks for the response.

    Sent from my SM-G965F using Tapatalk

  7. #7
    Join Date
    03.05.2012
    Posts
    227

    Default

    Quote Originally Posted by MatthiasF View Post
    Hello,

    we made a new webinterface available, which is bundled in the GHL Control Center or you can download from our page:
    https://www.aquariumcomputer.com/dow...ul-esp-update/


    This includes a manual for upgrading the webinterface via 'File transfers'.
    Followed the instructions to the tee and I get :

    1. File check succeeded
    2. An error occurred during the operation

    When I go to http://<Ip_Address> ->> I get the password prompt, type that in. I get a Profilux 4 Logo and the menu of Dashboard and Settings but that is it nothing new nothing useful.

    Any advice (web version 1.02)

    Running GCC - 1113 (have 1114 installed but change log does not say much on the Web Server so didnt use that). It takes me to: http://<Ip_Address>/#/app/dashboard, which shows me the just a Profilux 4 logo.
    Last edited by myprofilux; 29.05.2018 at 14:28. Reason: Adding info

  8. #8
    Join Date
    04.11.2015
    Posts
    1,062

    Default

    Hello,

    there is a video tutorial for you showing the upgrade:
    https://www.youtube.com/watch?v=F-cH-xJmiwU
    Also, when the error occurs, you can try to redo the upload. Under some rare conditions, this helped some users already.

    If the above procedure does not help, do the upgrade with the wifi-update-tool and the ProfiLux4's USB connection,
    like it is described in another very good video tutorial:
    https://www.youtube.com/watch?v=6z_7fhzJL-Q
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  9. #9
    Join Date
    03.05.2012
    Posts
    227

    Default

    Quote Originally Posted by MatthiasF View Post
    Hello,

    there is a video tutorial for you showing the upgrade:
    https://www.youtube.com/watch?v=F-cH-xJmiwU
    Also, when the error occurs, you can try to redo the upload. Under some rare conditions, this helped some users already.

    If the above procedure does not help, do the upgrade with the wifi-update-tool and the ProfiLux4's USB connection,
    like it is described in another very good video tutorial:
    https://www.youtube.com/watch?v=6z_7fhzJL-Q
    Will try now and let you know

  10. #10
    Join Date
    03.05.2012
    Posts
    227

    Default

    Ok so did the normal "Start" did the flash but nothing happened. Tried four times.

    Then did the reflash eprom option, took a while. Reset the WiFi settings, admin and password. IP settings etc

    Cleared cache of the browser, logged in and presto worked.

    Am I right in saying that eprom flash only clears the data for the WiFi module and that related file system I. E. Doesn't touch other profilux settings?

    Sent from my SM-G965F using Tapatalk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •