Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: GHL Logo Yellow

  1. #1
    Join Date
    20.05.2017
    Posts
    63

    Default GHL Logo Yellow

    I have noticed my GHL doser 2.0(slave), both of them linked to my P3 having Yellow logo - It is NOT blinking yellow.

    I have checked the dosing containers, and all of them are more than 90% , there are no warning etc..
    Any help?

  2. #2
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    The meaning of the color codes can be found here:
    https://www.aquariumcomputer.com/wha...-the-ghl-logo/

    Connect to your device and reactivate control when prompted.

  3. #3
    Join Date
    20.05.2017
    Posts
    63

    Default

    How do I do that?

  4. #4
    Join Date
    20.05.2017
    Posts
    63

    Default

    Any help?

    Sent from my SM-N950F using Tapatalk

  5. #5
    Join Date
    09.11.2017
    Posts
    1,476

    Default

    Hello,

    connect to your ProfiLux 3 with GHL Control Center and a prompt should appear. If not, then try to reset the PAB assignments and assign the PAB devices again.
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  6. #6
    Join Date
    20.05.2017
    Posts
    63

    Default

    Things I have done.
    I have connected it to my P3 via GCC. No prompts appear. The dosers come up on the system as it should. I have rechecked the configuration and numbering. Reassigned the numbering. The dosing schedule is working.
    All my dosing containers have more than 70%

    I have also removed the dosers and added them again.

    I could really do with some help.

  7. #7
    Join Date
    18.02.2009
    Location
    Kaiserslautern
    Posts
    7,710

    Default

    Check first page in GHL Control Center: Is the logo set to "yellow"?
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  8. #8
    Join Date
    20.05.2017
    Posts
    63

    Default

    Will check when back home.

    Sent from my SM-N950F using Tapatalk

  9. #9
    Join Date
    20.05.2017
    Posts
    63

    Default

    If I keep it as standard- it is yellow and blue alternating
    If I keep it as standard without blinking - it is yellow.

    Sent from my SM-N950F using Tapatalk

  10. #10
    Join Date
    18.02.2009
    Location
    Kaiserslautern
    Posts
    7,710

    Default

    so we have a blinking, not a constant yellow

    this means there is a warning

    check ALL 16 dosing channels, even if not used

    make sure that none of the channels has wrong settings

    e.g.: switchchannel mode
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •