Zeige Ergebnis 1 bis 5 von 5

Thema: How to work for Multiple aquarium controllers

  1. #1
    Registriert seit
    27.07.2012
    Beiträge
    69

    Standard How to work for Multiple aquarium controllers

    I see the function on P4 manual.
    the describe :“Multiple aquarium controllers can be networked”. I want to know how to work for it.

    Otherwise, everyone knows that P3 has 32 logic gates. How many P4 are there?,Thanks

  2. #2
    Registriert seit
    27.05.2015
    Beiträge
    2.163

    Standard

    Multiple P4 controllers can be added to the network. That is what it means.

    P4 also has 32 logic gates.

  3. #3
    Registriert seit
    27.07.2012
    Beiträge
    69

    Standard

    Zitat Zitat von Vinny Beitrag anzeigen
    Multiple P4 controllers can be added to the network. That is what it means.

    P4 also has 32 logic gates.
    I still don't understand? So, do it. What are the benefits? Is there P3 and P4 networking?
    By the way, 32 Logic gates isn’t enough to program. Is there any solution for the limited issue?

  4. #4
    Registriert seit
    27.05.2015
    Beiträge
    2.163

    Standard

    One may wish to have two separate controller systems within the same network instead of running everything on 1 controller. Each controller will have its own IP address and device address so that it can be differentiated in your network.

    32 PL gates is not enough?
    99% of users find that this is more than enough. Much of the programming can be doing using normal ProfiLux commands. Programmable Logic comes in handy when you want to tie-in multiple functions to a single powerbar outlet. Take a look at the P4 programming manual and Programmable Logic manual for more information.

  5. #5
    Registriert seit
    27.07.2012
    Beiträge
    69

    Standard

    Zitat Zitat von Vinny Beitrag anzeigen
    One may wish to have two separate controller systems within the same network instead of running everything on 1 controller. Each controller will have its own IP address and device address so that it can be differentiated in your network.

    32 PL gates is not enough?
    99% of users find that this is more than enough. Much of the programming can be doing using normal ProfiLux commands. Programmable Logic comes in handy when you want to tie-in multiple functions to a single powerbar outlet. Take a look at the P4 programming manual and Programmable Logic manual for more information.
    Hi Vinny, I greatly appreciate your timely reply!

    But I have being using about 32 logic gates, I am afraid to worry about my new needs for the future programming.

Forumregeln

  • Es ist dir nicht erlaubt, neue Themen zu verfassen.
  • Es ist dir nicht erlaubt, auf Beiträge zu antworten.
  • Es ist dir nicht erlaubt, Anhänge hochzuladen.
  • Es ist dir nicht erlaubt, deine Beiträge zu bearbeiten.
  •