Results 1 to 5 of 5

Thread: BUG in GCC 1.1.1.3 - collecting measurements data and P3.1t

  1. #1
    Join Date
    24.01.2011
    Location
    Bohus, Sweden
    Posts
    184

    Default BUG in GCC 1.1.1.3 - collecting measurements data and P3.1t

    Hi

    Run into some problems with GCC 1.1.1.3 and collecting measurements data from P3 ex and P3.1T. Different firmware - 1 P3 ex - FW 6.29; 1 P3 ex FW 6.34 and one P3.1T FW 6.33. When trying to collect measurement data - I get the result you can se in my attached file. ( encountered an improper argument)

    Screen Shot 05-10-18 at 09.20 AM.jpg


    Switching to GCC 1.1.1.2 solve the problem and I can collect data as it should.

    The problems seems to be restricted to P3 variants - with P4 - FW 7.12 and GCC 1.1.1.3 it works as it should - it is possible to collect measurements data with GCC 1.1.1.3.

    Sincerely Lasse

  2. #2
    Join Date
    24.01.2011
    Location
    Bohus, Sweden
    Posts
    184

    Default

    Comments?

    Sincerely Lasse

  3. #3
    Join Date
    10.10.2013
    Posts
    992

    Default

    Same for me:

    GCC 1.1.1.4.jpg
    GCC 1.1.1.2.jpg

    Gael

  4. #4
    Join Date
    01.03.2017
    Posts
    19

    Default

    Same here as well had to rollback the version.

  5. #5
    Join Date
    24.01.2011
    Location
    Bohus, Sweden
    Posts
    184

    Default

    A tip

    You do need to rollback if you want to run earlier installed version - The versions is still in the directory c:/program (x86). Just go to the directory you want (ex c:/program (x86)/GHLControlCenter_V1111 and click on the actual GHL control center.exe file.

    Sincerely Lasse

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •