Results 1 to 5 of 5

Thread: GHL Profilux 4 & Orphek PR72s

  1. #1
    Join Date
    13.02.2015
    Location
    Glenn Dale, MD
    Posts
    21

    Default GHL Profilux 4 & Orphek PR72s

    Just got my Profilux 4! Wondering if my Apex ready Orphek PR72s will work with Profilux or if the RJ45 jack pin assignments are different?

  2. #2
    Join Date
    10.10.2013
    Posts
    992

    Default

    Profilux L-port is RJ12 not RJ45.
    You will have to modify one side of the cable in RJ12 instead of RJ45 respecting the assignment of the pins:
    Profilux pinout is:
    L1:
    Pin2: +
    Pin3: -

    L2:
    Pin5: +
    Pin3: -
    Steckerbelegungen des ProfiLux.pdf

    Apex pinout is
    L1:
    Pin1: +
    Pin2: -

    L2:
    Pin5: +
    Pin6: -
    Last edited by Gael; 22.04.2018 at 21:43. Reason: Typo

  3. #3
    Join Date
    13.02.2015
    Location
    Glenn Dale, MD
    Posts
    21

    Default

    Hi itsmorefun!

    Thanks very much for the info!

    All the Best,
    FirstContact

  4. #4
    Join Date
    13.08.2010
    Posts
    4,150

    Default

    The correct designation is RJ12 6P6C not RJ11

    regards Pit

  5. #5
    Join Date
    13.02.2015
    Location
    Glenn Dale, MD
    Posts
    21

    Default

    Thanks much!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •