Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Floater inconsistent

  1. #1
    Join Date
    30.03.2011
    Location
    helsingborg
    Posts
    177

    Default Floater inconsistent

    Hi! I have a floater for ato. I have the p4 7.11. The sensor has to be 3cm under water to shut of the water. But to get it going i have to raise it up. Is the sensor defect? Its brand new.

    Skickat från min G8141 via Tapatalk

  2. #2
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    If you need to move the floater upwards to get it to react, then it sounds like the sensor is upside down. Either place the sensor upwards or change the behavior of this sensor to INVERTED.

    You can find this option in the LEVEL settings page, see Settings and states level-sensor. Select the sensor number you are using and set the inverted option to YES.

  3. #3
    Join Date
    30.03.2011
    Location
    helsingborg
    Posts
    177

    Default

    Hmm the cord is up. Should it be under? Its not inverted and the cord is up. Wrong?

    Skickat från min G8141 via Tapatalk

  4. #4
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    Cord should be upwards.

    Which LEVEL function are you using for ATO?

  5. #5
    Join Date
    30.03.2011
    Location
    helsingborg
    Posts
    177

    Default

    Operationmode auto top off.

    Skickat från min G8141 via Tapatalk

  6. #6
    Join Date
    30.03.2011
    Location
    helsingborg
    Posts
    177

    Default

    So?

    Skickat från min G8141 via Tapatalk

  7. #7
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    Toggle the sensor and take a look at the state of this sensor. Also check to see you get this same reaction when connected to another LEVEL port.

  8. #8
    Join Date
    30.03.2011
    Location
    helsingborg
    Posts
    177

    Default

    Ok will do

    Skickat från min G8141 via Tapatalk

  9. #9
    Join Date
    30.03.2011
    Location
    helsingborg
    Posts
    177

    Default

    Tried channel 3 instead of 1. Toggled it etc. Same problem

    Skickat från min G8141 via Tapatalk

  10. #10
    Join Date
    30.03.2011
    Location
    helsingborg
    Posts
    177

    Default

    Help plz. What to do?

    Skickat från min G8141 via Tapatalk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •