Hi to all. I try to controll light on digital powerbar,turning on and off but never dimming.Do i conect cable to L2 or S2.Thank you
Hi to all. I try to controll light on digital powerbar,turning on and off but never dimming.Do i conect cable to L2 or S2.Thank you
What kind of light? MH or T5 are they dimmable?
I think that these are not dimmable, not sure!
Powerbars must always be connected to S-ports! Otherwise ProfiLux may be destroyed!
The L-ports are 1-10V interfaces which are used to control dimmable lamps or current pumps.
This is all mentioned in the manual and additionally in a warning leaflet which comes with every ProfiLux.
Yes, in order to dim/control a dimmable lamp you don't need the Powerbar. Just connect it to one of the L-ports of the 1-10V-interfaces. That's all.
I see potential confusion here.
To dim a lamp you need "dimmable ballasts"
A dimmable ballast has a 1-10V interface, this connects to one of your L ports.
The AC power from the dimmable ballast can either come from the power bar OR you can use the EVG-AP card.
Without dimmable ballasts you will not dim your lamp.
Thank you for helping out now i start to feel what to do.Thank you .
Bookmarks