Results 1 to 10 of 10

Thread: Light controll

  1. #1
    Join Date
    08.03.2009
    Posts
    18

    Light controll

    Hi to all. I try to controll light on digital powerbar,turning on and off but never dimming.Do i conect cable to L2 or S2.Thank you

  2. #2
    Join Date
    20.02.2009
    Posts
    41

    Default

    What kind of light? MH or T5 are they dimmable?

  3. #3
    Join Date
    08.03.2009
    Posts
    18

    Default

    Quote Originally Posted by kidney514 View Post
    What kind of light? MH or T5 are they dimmable?
    No not MH regular PClight for Oceanic biocube i think 2x16W

  4. #4
    Join Date
    20.02.2009
    Posts
    41

    Default

    I think that these are not dimmable, not sure!

  5. #5
    Join Date
    08.03.2009
    Posts
    18

    Default

    Quote Originally Posted by kidney514 View Post
    I think that these are not dimmable, not sure!
    Thank you i try to buy something dimmeble.Just explane PLS how to conect.L1L2 port and setup in the menu or S1 S2 and setup in the menu.I use 6socket digital powerbar.Thank you for your time.

  6. #6
    Join Date
    18.02.2009
    Location
    Kaiserslautern
    Posts
    7,710

    Default

    Powerbars must always be connected to S-ports! Otherwise ProfiLux may be destroyed!
    The L-ports are 1-10V interfaces which are used to control dimmable lamps or current pumps.

    This is all mentioned in the manual and additionally in a warning leaflet which comes with every ProfiLux.

  7. #7
    Join Date
    08.03.2009
    Posts
    18

    Rotes Gesicht

    Quote Originally Posted by Matthias View Post
    Powerbars must always be connected to S-ports! Otherwise ProfiLux may be destroyed!
    The L-ports are 1-10V interfaces which are used to control dimmable lamps or current pumps.

    This is all mentioned in the manual and additionally in a warning leaflet which comes with every ProfiLux.
    Thank you for replay,i conected to S1 and turning ON and OFF,but never dimm,i will look for that dimmeble interface.If i conect to dimmeble interface,dont need powerbar? Thank you,but look like am to old for to that.

  8. #8
    Join Date
    19.02.2009
    Posts
    2,976

    Default

    Yes, in order to dim/control a dimmable lamp you don't need the Powerbar. Just connect it to one of the L-ports of the 1-10V-interfaces. That's all.

  9. #9
    Join Date
    19.02.2009
    Location
    MANOTICK
    Posts
    866

    Default

    I see potential confusion here.

    To dim a lamp you need "dimmable ballasts"

    A dimmable ballast has a 1-10V interface, this connects to one of your L ports.

    The AC power from the dimmable ballast can either come from the power bar OR you can use the EVG-AP card.

    Without dimmable ballasts you will not dim your lamp.


    GHL ProfiLux Canada/USA Distribution and support

  10. #10
    Join Date
    08.03.2009
    Posts
    18

    Blinzeln Light

    Thank you for helping out now i start to feel what to do.Thank you .

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •