Hey guys. Just received my PropellerController 2.1 and PropellerBreeze4 and want to get it controlled with my Apex. I know this is a GHL forum, but I already had a Apex equipment and will look at the GHL KH Director, etc. once it take a nose dive.

Now to the question. I was able to find a pinout in the forum, but do not know if this is the same for the PropellerController 2.1. This is what I found:

Pin Function Color
1 +12V Black
2 Dimming intensity channel 1 Brown
3 GND Red
4 On/off channel 1 (relay control) Orange
5 Dimming intensity channel 2 Yellow
6 On/off channel 2 (relay control) Green

If the above is correct that is great. Now the Apex cable only has 4 cables. Here is the pic below:
apex_dimming_cable.png

Now to the question. To connect the PropellerController to the Apex, what wire should I use in the image above? How could I match up the pins to be able to control the PropellerBreeze with the Apex?

Would I simply go:
Apex BLACK to PropellerController 2 Dimming intensity channel 1 Brown
Apex RED to PropellerController 3 GND Red
Apex GREEN to PropellerController 4 On/off channel 1 (relay control) Orange
Apex YELLOW - NOT USED