Zeige Ergebnis 1 bis 3 von 3

Thema: PropellerController 2.1 to Apex 0-10V Pinout

  1. #1
    Registriert seit
    10.03.2018
    Beiträge
    2

    Standard PropellerController 2.1 to Apex 0-10V Pinout

    Hey guys. Just received my PropellerController 2.1 and PropellerBreeze4 and want to get it controlled with my Apex. I know this is a GHL forum, but I already had a Apex equipment and will look at the GHL KH Director, etc. once it take a nose dive.

    Now to the question. I was able to find a pinout in the forum, but do not know if this is the same for the PropellerController 2.1. This is what I found:

    Pin Function Color
    1 +12V Black
    2 Dimming intensity channel 1 Brown
    3 GND Red
    4 On/off channel 1 (relay control) Orange
    5 Dimming intensity channel 2 Yellow
    6 On/off channel 2 (relay control) Green

    If the above is correct that is great. Now the Apex cable only has 4 cables. Here is the pic below:
    apex_dimming_cable.png

    Now to the question. To connect the PropellerController to the Apex, what wire should I use in the image above? How could I match up the pins to be able to control the PropellerBreeze with the Apex?

    Would I simply go:
    Apex BLACK to PropellerController 2 Dimming intensity channel 1 Brown
    Apex RED to PropellerController 3 GND Red
    Apex GREEN to PropellerController 4 On/off channel 1 (relay control) Orange
    Apex YELLOW - NOT USED

  2. #2
    Registriert seit
    10.03.2018
    Beiträge
    2

    Standard

    Man i can see why Neptune Systems is killing it right now. I cannot even find a manual to tell me what the pins are for in the controller. This really sucks.

  3. #3
    Registriert seit
    10.10.2013
    Beiträge
    322

    Standard

    Sorry but where do you see you can use PropellerController 2.1 and PropellerBreeze4 without Profilux?
    It will not work because i think PropellerController 2.1 need relay control and can't work only with 0-10v commande.
    Apex don't have relay control on his 1-10v interfaces.

Forumregeln

  • Es ist dir nicht erlaubt, neue Themen zu verfassen.
  • Es ist dir nicht erlaubt, auf Beiträge zu antworten.
  • Es ist dir nicht erlaubt, Anhänge hochzuladen.
  • Es ist dir nicht erlaubt, deine Beiträge zu bearbeiten.
  •