-
Tunze Stream Cables
Can you tell me the difference of the 2 cables you make to connect Tunze Streams as I am knew to this and want to connect 2 x Tunze 6095's which will eventually be replaced with 2 x Streams 3's
https://www.sewatec.de/ghl-profiluxt...nze-l1-l3.html
https://www.sewatec.de/ghl-profiluxt...nze-l2-l4.html
-
Hello,
There are 2 0-10v outputs on each port L.
The PL-0087 cable allows to use the first output and the PL-0088 the second.
So in summary, to connect a single Tunze pump to an L port you can use PL-0087 or PL-0088 (if port L is port L1/L2, with PL-0087 the pump will be controlled by L1 and with PL-0088 the pump will be controlled by L2)
To connect 2 pumps to the same port L you need PL-0087 + PL-0088 + PL-0096.
Gael
Last edited by Gael; 08.03.2018 at 10:38.
-
To add to what Gael said:
Tunze 1 cables are for odd numbered L-channels; L1, L3, L5, etc.
Tunze 2 cables for for even numbered L-channels; L2, L4, L6, etc.
-
Right I see, many thanks :-)
-
Sorry, just final confirmation as I am about to order P4 Megaset with these cables. I want to control 2 Tunze stream pumps independently so I eed to order a Tunze 1 and a Tunze 2 cable?
-
If you want to use two L-port, yes, if you want to use only one L-port for your two pumps you need also PL-0096.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks