Tunze Stream Cables

[Clownfishy]

Can you tell me the difference of the 2 cables you make to connect Tunze Streams as I am knew to this and want to connect 2 x Tunze 6095's which will eventually be replaced with 2 x Streams 3's

https://www.sewatec.de/ghl-profiluxt...nze-l1-l3.html
https://www.sewatec.de/ghl-profiluxt...nze-l2-l4.html

[Gael]

Hello,

There are 2 0-10v outputs on each port L.
The PL-0087 cable allows to use the first output and the PL-0088 the second.
So in summary, to connect a single Tunze pump to an L port you can use PL-0087 or PL-0088 (if port L is port L1/L2, with PL-0087 the pump will be controlled by L1 and with PL-0088 the pump will be controlled by L2)
To connect 2 pumps to the same port L you need PL-0087 + PL-0088 + PL-0096.

Gael

[Vinny]

To add to what Gael said:

Tunze 1 cables are for odd numbered L-channels; L1, L3, L5, etc.
Tunze 2 cables for for even numbered L-channels; L2, L4, L6, etc.

[Clownfishy]

Right I see, many thanks :-)

[Clownfishy]

Sorry, just final confirmation as I am about to order P4 Megaset with these cables. I want to control 2 Tunze stream pumps independently so I eed to order a Tunze 1 and a Tunze 2 cable?

[Gael]

If you want to use two L-port, yes, if you want to use only one L-port for your two pumps you need also PL-0096.