Results 1 to 3 of 3

Thread: Powerbar 5.1 smell like burned plastic

  1. #1
    Join Date
    13.10.2016
    Posts
    59

    Default Powerbar 5.1 smell like burned plastic

    Hallo

    I use the Powerbar 5.1 i conjunction with my profilux 4. It is connected with an original PAB cable. I noticed that the powerbar smell like burned plastic but it works fine. I am just thinking is this normal? I know that new electronics do this but I have used the powerbar for around a year.

    The powerbar is not pulling mere then 150 watt so it should not be the fuse.

    Best regards
    Kasper Jensen

  2. #2
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    Hi Kasper,

    Please check the surrounding area for other equipment.

    If the total usage out of the PB is only 150w and all outlets are responsive, then these are okay. You can also check the S5 fuse to make sure it is still in good condition.

  3. #3
    Join Date
    18.02.2009
    Location
    Kaiserslautern
    Posts
    7,710

    Default

    if you don't overload the PB you are fine

    if you overload the fuse will trip
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •