The Mitras channels for the light bar do not work above the defualt channels that are assigned in the Light Composer. No matter what you do you must use channels 1-10. My Issue is I had my Simulation Sick also using 1-4. No mater what you do in the light composer to set the channels, and then come to the assign the channels in the mitras config if you do not choose channels 1-10 the lights will not work. The only way I could get them to work is use channels 1-10. (Are we only suppose to use channel 1-10?)

mitras_channels.png

light3.png

It did not matter that within light composer I set light source channels to 15-25 and had them match the Mitras Channels the lights would just turn on with a nice 4 yellow LED configuration.