Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: yellow/blue GHL logo

  1. #1
    Join Date
    30.04.2010
    Posts
    155

    Default yellow/blue GHL logo

    hi,

    my doser and KH director logos are flashing yellow/blue,how do i find out what the warning is?

  2. #2
    Join Date
    07.04.2017
    Posts
    157

    Default

    Its from what I know a doser container warning. It can help if you make sure its something in the "containers" that the KH director use. If they are 0 it will flash yellow / blue.

  3. #3
    Join Date
    30.04.2010
    Posts
    155

    Default

    thanks for the reply.

    all my doser levels are fine dose.png

  4. #4
    Join Date
    07.04.2017
    Posts
    157

    Default

    Check the 4-6 if they might be 0, but running.

  5. #5
    Join Date
    30.04.2010
    Posts
    155

    Default

    how do i check to see if they are running?

  6. #6
    Join Date
    07.04.2017
    Posts
    157

    Default

    Quote Originally Posted by gino555 View Post
    how do i check to see if they are running?
    Check if any schedule is set, or maybe alarm is checked. Just go though all of them, check the alarm, minimum container, and if your current fluid goes over / under that (remember the pump no 3 is filling a container so you have to be under the alarm, not over). Also check if any of the 4-6 if the calculated dosing is over 0, then a schedule is set.

  7. #7
    Join Date
    30.04.2010
    Posts
    155

    Default

    pump 1.jpg pump 2.jpgpump 3.jpgpump 4.jpgpump 5.jpglooks ok to me not sure if i am missing something

  8. #8
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    Doser will begin to flash yellow once the fluid container levels drops to 40%.

    An explanation of the color codes can be found on our FAQ page
    Last edited by Vinny; 29.01.2018 at 22:42.

  9. #9
    Join Date
    30.04.2010
    Posts
    155

    Default

    Hi Vinny,

    all my are above 60% except the waste water.

    dose overview.jpg

  10. #10
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    Hi,

    I noticed I made a typo.

    I meant to say the logo will begin flashing YELLOW when the level below reaches 40%.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •