cant set up KHD

[Gael]

Do you find the probleme Matthias?

[Thilo]

The pumps are working when you dose manually from the ProfiLux 3 (not from the Doser) in GHL Control Center?

[Gael]

The pumps are working when you dose manually from the ProfiLux 3 (not from the Doser) in GHL Control Center?

Yes for me.

[gino555]

my pumps are 1,2,3 and can dose from the "Dose now" button in GCC. i also calibrated the pumps and seemed to be fine. pump two came out at 6ml flow rate (on slow) for the reagent not sure if that is normal?

[Matthias]

my pumps are 1,2,3 and can dose from the "Dose now" button in GCC. i also calibrated the pumps and seemed to be fine. pump two came out at 6ml flow rate (on slow) for the reagent not sure if that is normal?

6ml seems a bit high to me, I expect something around 4.5ml

[Matthias]

just to be sure: your P3 is updated to firmware 6.32 and you use GCC1.1.1.0?

[Gael]

GCC 1.1.1.0 2018-01-24

***** System report *****
Controller properties
Name: ProfiLux 3.1T eX
Firmwareversion: 6,32
Device address: 2
PAB address: 17
Slot count: 3
Level inputs: 4
Sensor 1: pH-value
Sensor 2: Temperature
Sensor 3: Conduct.(S)
Sensor 4: Redox
Onboard 1-10V outputs: 6
Onboard socket outputs: 8

Slot/card properties
Slot number 0
Name: SERIAL
Class: Communication card

Slot number 1
Name: 2L4S
Class: Intelligent card
Firmwareversion: 1,00
1-10V outputs: 2
Socket outputs: 4

Slot number 2
Name: PWC
Class: Communication card

PAB devices

Name: SMS-Module
Firmwareversion: 3,04
PAB-address: 19

Name: Expansion Box
Firmwareversion: 1,08
PAB-address: 18

Name: VorTech-Controller
Firmwareversion: 1,04
PAB-address: 20

Name: ProfiLux Touch
Firmwareversion: 1,06
PAB-address: 21

Name: GHL Doser 2 Slave
Firmwareversion: 1,27
PAB-address: 22

Name: GHL Doser 2 Slave
Firmwareversion: 1,27
PAB-address: 23

Name: KH Director
Firmwareversion: 1,00
PAB-address: 24

[gino555]

***** System report *****

Controller properties

Name: ProfiLux 3.1N eX
Firmwareversion: 6.32
Device address: 1
PAB address: 17
Serialnumber: 1210063001
Slot count: 3
Level inputs: 4
Sensor 1: pH-value
Sensor 2: Temperature
Sensor 3: Conduct.(S)
Sensor 4: Redox
Onboard 1-10V outputs: 6
Onboard socket outputs: 8


Slot/card properties

Slot number 0
Name: SERIAL
Class: Communication card

Slot number 1
Name: PWC
Class: Communication card

Slot number 2
none


PAB devices

Name: VorTech-Controller
Firmwareversion: 1.03
PAB-address: 19
Serialnumber: 1008056024

Name: Powerbar 6
Firmwareversion: 1.08
PAB-address: 18
Serialnumber: 1207054072

Name: ProfiLux Touch
Firmwareversion: 1.06
PAB-address: 20
Serialnumber: 1207057055

Name: GHL Doser 2 Slave
Firmwareversion: 1.27
PAB-address: 22
Serialnumber: 1801082017

Name: KH Director
Firmwareversion: 1.00
PAB-address: 21
Serialnumber: 1801088054

[gino555]

just updated to GCC 1.1.1.0 and it is still the same. buttons change from grey to blue when I click them but no response from the doser or KHD

[Gael]

What can we do to help GHL to diagnose the problem?
Someone has KH Director successfully working with P3?
Thank