Results 1 to 9 of 9

Thread: Firmware 6.13 missing

  1. #1
    Join Date
    20.01.2018
    Posts
    3

    Default Firmware 6.13 missing

    Hi,
    Guys, need help. I'm blind i think, i can't find firmware ver. 6.13 in download section is missing, please, can someone post me a link?

  2. #2
    Join Date
    18.02.2009
    Location
    Kaiserslautern
    Posts
    7,710

    Default

    all the available firmware files are included in the GHL Control Center installation (please install newest GCC)

    6.13 is very old
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  3. #3
    Join Date
    20.01.2018
    Posts
    3

    Default

    Thx Matthias i was really blind

  4. #4
    Join Date
    08.02.2011
    Posts
    12

    Default

    Hello,

    I have the same problem
    I have a profilux3 Ex with 5.17 firmware...
    I must only use ProfiluxControl (firmware 5.0 to 5.17) to update the firmware (GCC not working) ?
    Have you a link to download a firmware for my profilux and after i can use GCC to install last firmware ?

    Best regards

  5. #5
    Join Date
    08.02.2011
    Posts
    12

    Default

    I view this:

    Quote Originally Posted by Matthias View Post
    I think it is much easier to do this:

    install newest ProfiLuxControl
    install newest GHL Control Center
    connect to P3 using ProfiLuxControl
    start update process
    when selecting the firmware navigate to the GHL Control Center program folder and select there the newest ProfiLux 3 firmware
    finish the update
    reboot
    connect now with GCC
    I try but i have an error to erase flash:
    Error while transmitting firmware- FLASHERASE - no response - 8

    Capture.jpg

    What can I do ?

    EDIT: It's ok, i forget tu push buton on profilux !

    Thank
    Last edited by Morlock; 10.02.2018 at 16:43.

  6. #6
    Join Date
    17.01.2018
    Location
    Clearwater Beach, FL
    Posts
    21

    Default

    I just got the new ProfiLux4 controller, do I need to do any type of upgrade on the firmware! Bare with me, I just switched over from all Apex to GHL gear! I Haven't even plugged in anything yet b/c I am wiating on the GHL dosing pump but when i do plug it in, just want to know if I am going to need to do a update,
    Het beste,
    FLSharkvictim

    Tank Info: Rimless 150 Mixed Reef

  7. #7
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    Quote Originally Posted by Morlock View Post
    I view this:



    I try but i have an error to erase flash:
    Error while transmitting firmware- FLASHERASE - no response - 8

    Capture.jpg

    What can I do ?

    EDIT: It's ok, i forget tu push buton on profilux !

    Thank
    Glad to hear you figured it out.

  8. #8
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    That will depend on your purchase date.

    Your best bet is to first download the latest version of GCC, then do an update anyway. That way you can benefit from all the latest features from the start.

    When you're ready to set things up, feel free to take a look at our YouTube channel for how to videos. If you need further assistance, we're always here to help.

  9. #9
    Join Date
    17.01.2018
    Location
    Clearwater Beach, FL
    Posts
    21

    Default

    Your guys rock thanks!
    Het beste,
    FLSharkvictim

    Tank Info: Rimless 150 Mixed Reef

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •