Results 1 to 5 of 5

Thread: Failed to connect P4 on the wifi

  1. #1
    Join Date
    18.09.2013
    Posts
    51

    Default Failed to connect P4 on the wifi

    Hello,

    As my P4 is far from my modem (the box from my Internet provider), I have bought an Apple Airport Express in order to have good wifi in my fish room.
    Despite many efforts, I have not been able to connect the P4 (through the Control Center) to my Aipport Express.
    The network from my Airport has a specific name (chosen by me at set-up of the Airport) and a dedicated password. I have been able to connect my computer, but using the same network name and the same password, it doesn't work for the P4.

    In the CC, I filled-in the SSID box with the name of the network.
    Then I selected "WPA WPA2 PSK"
    Then in the box wifi key, I entered the password.
    This is not correct?

    Please help me because I am loosing it !!!
    Thanks a lot

  2. #2
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    We need more information to better help you in this matter.


    Have you tried to ping the IP address of your P4?
    What was the result?

    Did you setup the P4's WiFi using DHCP or Static IP?

    Please provide screenshots of your COMMUNICATION settings page and ipconfig settings from command prompt.

  3. #3
    Join Date
    18.09.2013
    Posts
    51

    Default

    Hi, attached are the screenshots.UNADJUSTEDNONRAW_thumb_20f1.jpgUNADJUSTEDNONRAW_thumb_20f2.jpgUNADJUSTEDNONRAW_thumb_20f0.jpg
    I am not an expert in IT. I am not able to go through the IP config settings on the computer.
    Please help !
    Thanks

  4. #4
    Join Date
    04.11.2015
    Posts
    1,062

    Default

    Hello,

    it might be related to the used accent in your SSID.
    The characters should be changed to standard latin (ASCII) on your router
    and then in GHL Control Center configuration.
    After that, the wifi module should connect and show the currently assigned ip address.
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  5. #5
    Join Date
    18.09.2013
    Posts
    51

    Default

    Great, it works !
    You were right, many thanks !!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •