Results 1 to 10 of 10

Thread: Doser 2.0 Stand alone "communication error code 50"

  1. #1
    Join Date
    28.11.2017
    Posts
    5

    Default Doser 2.0 Stand alone "communication error code 50"

    I am having trouble getting the doser to work.

    Finally got it connected to wifi, but every time I try and calibrate the doser, I will get the "communication error code 50"

    Does anyone have the fix for this?

  2. #2
    Join Date
    13.08.2010
    Posts
    4,150

    Default

    Hi
    Have you tried the settings via USB and the GHLControlCenter?
    Which firmware is on the doser and which version of the ControlCenters do you use?

    regards Pit

  3. #3
    Join Date
    28.11.2017
    Posts
    5

    Default

    Yes, I originally connected through USB to set up wifi. (my aquarium is not close by my computer)

    After the wifi connection was setup, I moved the doser to the aquarium to try and set it up.

    firmwareversion 1.24

    GHL control center is version 1100

  4. #4
    Join Date
    13.08.2010
    Posts
    4,150

    Default

    Do you have a sufficient WLan signal on the Profilux?
    Can you post a screenshot of the WLan settings here

    regard Pit

  5. #5
    Join Date
    28.11.2017
    Posts
    5

    Default

    Yes, there is sufficient signal. I can get it to work sometimes, but 95% of the time I get the error code.

    Here is a screen shot of my wifi settings. Thank you

    wifi.jpg
    Last edited by travis_ham; 02.12.2017 at 19:46.

  6. #6
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    Please try with GCC 1103.

  7. #7
    Join Date
    28.11.2017
    Posts
    5

    Default

    Just downloaded 1103, still the same code appears.

  8. #8
    Join Date
    28.11.2017
    Posts
    5

    Default

    Bump! anyone?

  9. #9
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    We will look into this further.

    On the meantime, we ask that you calibrate the Doser via GCC (USB), myGHL, or GHL Control app.

  10. #10
    Join Date
    18.02.2009
    Location
    Kaiserslautern
    Posts
    7,710

    Default

    is this only with WiFi, only with USB, or both?
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •