-
USB Drivers
I am attempting to connect to one of my Mitras LX7 with a laptop and USB cable. On a Windows 10 laptop I receive a "Unknown USB Device (Device Descriptor Request Failed)" message and on Windows 7, I receive an "Unknown Device" in the Universal Serial Bus controllers (Device Manager). I followed the instructions on another thread (http://forum.aquariumcomputer.com/sh...request+failed) and manually uninstalled the USB device and then install the GHL drivers with no change. I attempted this procedure on 4 different laptop with the same results. Do you have any additional suggestions.
Mark
Mark
-
Hallo Mark
This is the wrong driver for an LX. You need the cypress driver. You have a PN
regards Pit
-
Thank you for the quick reply. I installed the driver and I still have the same issue. I tried it on both the Windows 7 and Windows 10 laptops.
Mark
Mark
-
Connect the Mitras to the PC
open the DeviceManager
uninstall the driver completely
disconnect the Mitras from the PC
Restart the PC
Install the driver
Restart the PC
connect the Mitras
-
Mark
-
Did you use the original USB cable? If no test whether another, equally long or shorter one works.
Have you used a different USB port for testing?
regards Pit
-
Yes, I was using the original cable and I tried different USB ports on different computers. I have two Mitras so I tried the other cable. 24 years in IT and I have never seen a cable fail like this one. The other cable worked fine. Thanks for your help.
Mark
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks