Seite 3 von 12 ErsteErste 12345 ... LetzteLetzte
Zeige Ergebnis 21 bis 30 von 116

Thema: ProfiLux 3: What to do in the case a firmware update failed

  1. #21
    Registriert seit
    19.02.2009
    Ort
    MANOTICK
    Beiträge
    866

    Standard

    so you are using the flash tool?

    Ok if so, there is a very small window you have of time to apply power to get the reset.

    Switch controller off

    Press the full operation tab and immediatly re apply power.


    GHL ProfiLux Canada/USA Distribution and support

  2. #22
    Registriert seit
    06.01.2010
    Beiträge
    32

    Standard

    yes, i read the original post about unplugging and plugging it back in and i still at the reset the board on the flash tool. i find this very frustrating. i am re-installing the P2 hardware as i cannot spend all day working on this.
    Geändert von frank40 (06.01.2010 um 21:48 Uhr)

  3. #23
    Registriert seit
    19.02.2009
    Ort
    MANOTICK
    Beiträge
    866

    Standard

    I guess you are doing this over USB.

    I will ask matthias to help you sounds like you need the slower flash tool.


    GHL ProfiLux Canada/USA Distribution and support

  4. #24
    Registriert seit
    06.01.2010
    Beiträge
    32

    Standard

    yes i am using USB for flashing as my laptop does not have RS232

  5. #25
    Registriert seit
    21.05.2009
    Ort
    Bamberg
    Beiträge
    367

    Standard

    I think you can not use the internal USB of the PL and the flash tool.
    The flash tool works only with an externen USB to RS232 converter.
    mfg


    Klaus D.

  6. #26
    Registriert seit
    18.02.2009
    Ort
    Kaiserslautern
    Beiträge
    7.625

    Standard

    dr.dotti is right - the Flash FR update tool works only on the RS232 port
    try the recovery on another PC which has RS232 or use a USB-RS232 converter (some converters are really bad - converters with Prolifi or FTDI chipset work best)

  7. #27
    Registriert seit
    06.01.2010
    Beiträge
    32

    Standard

    is there a particular brand name for said USB/232 converters?

  8. #28
    Registriert seit
    30.12.2009
    Beiträge
    51

    Standard

    Zitat Zitat von frank40 Beitrag anzeigen
    my lcd screen is not on so i am not touching the profilux, the only thing i am doing is unplugging and plugging it back in when i get the reset message on my pc
    i had the issue where the profilux was dead no lcd no nothing thought it was dead

    Then used the flasher tool and it came back to life

  9. #29
    Registriert seit
    06.01.2010
    Beiträge
    32

    Standard

    i just got the power adapter in and proceeded with the flashing the firmware on a USB-RS232 adapter and my P3 is finally up and running

  10. #30
    Registriert seit
    30.04.2009
    Beiträge
    27

    Standard

    I too had some major problems here. I wanted to give an update on the issues I encountered and what solved it.

    I used a Belkin F5U409-CU USB to Serial adapter. The software is not Windows 7 compatible. I even went to Belkin website and it is not available yet.

    I then used another machine with XP. When selecting the Full Operation button, I got another error code. I hit the download button then the dialog box to plug in power cord came up. It finished, but screen was still black.

    Then I had to disconnect power cord. Now, all those buttons became available: Erase, Download, Blank Check, Program and verify, etc. I then selected the Full operation button and it uploaded the latest 5.0k firmware.

    But, the screen was still black. I then disconnected the power cord and removed adapter. Plugged power cord back in and the Profilux came to life with new firmware.

    I hope this information eases somebody’s pain.

Forumregeln

  • Es ist dir nicht erlaubt, neue Themen zu verfassen.
  • Es ist dir nicht erlaubt, auf Beiträge zu antworten.
  • Es ist dir nicht erlaubt, Anhänge hochzuladen.
  • Es ist dir nicht erlaubt, deine Beiträge zu bearbeiten.
  •