Seite 12 von 12 ErsteErste ... 2101112
Zeige Ergebnis 111 bis 116 von 116

Thema: ProfiLux 3: What to do in the case a firmware update failed

  1. #111
    Registriert seit
    04.12.2017
    Beiträge
    19

    Standard

    Zitat Zitat von PIWAWT Beitrag anzeigen
    Start the Flash program as administrator
    Check the port settings in the Device Manager (COMx). Check another COM port. You can change it under Extended.
    Do you have another power supply for the Profilux? Caution: 12VDC

    Anhang 10221
    Sorry is in German

    Did all, checked in device manager, changed to com4, followed on flash program, same issue. Tried two other
    power adaptors as I have from doser 1 which is completely same and nothing changed. I have no idea what else to try.

  2. #112
    Registriert seit
    04.12.2017
    Beiträge
    19

    Standard

    Issue solved. Things which helped - Old 2009 desktop pc with xp os and physical com port present on board. RS232 cable from our server room and brand new flash app from cypres website. It is important to mention
    that flasher which is provided on downloads page did not worked, just new one from chip manufacturer site. Process went fine from first attempt. I've checked within app, serial number and all parameters are visible, load and save data
    works, fw readout is 6.31 as it should be, device is alive again. I will try later today LAN and USB connection as this was initial reason I refreshed firmware.

    Thank you very much for help and support. Sometimes without old technology new things cannot work.

  3. #113
    Registriert seit
    12.02.2018
    Beiträge
    3

    Standard

    Hello!

    I have a profilux3 with firmware 5.10. Can you tell me how to update the firmware to 6. I can not find it in the download.

    Thanks for your help.

  4. #114
    Registriert seit
    04.12.2017
    Beiträge
    19

    Standard

    Zitat Zitat von stargate Beitrag anzeigen
    Hello!

    I have a profilux3 with firmware 5.10. Can you tell me how to update the firmware to 6. I can not find it in the download.

    Thanks for your help.
    Download GHL control center, when you install app you will find in installation directory firmware folder. There you can find latest firmware.

  5. #115
    Registriert seit
    12.02.2018
    Beiträge
    3

    Standard

    Thank you for the answer.

    When I open the control center (my profilux 3 is connected by the USB), I have an error message: "The connected Profilux has too low firmware version and cannot be used with this version of Profilux Control. It is the reason why I need to update the firmware of profilux 3.

    In theory I should connect with the ProfiLuxSer, but I do not have a corresponding port on my computer.

    What other solution for the update in version 6?

    Thank you

  6. #116
    Registriert seit
    13.08.2010
    Beiträge
    3.739

    Standard

    If your Profilux has a connection to the PC, you need an emergency update, or you need an very
    old control software.
    You need:
    ProfiLux 3 & 3.1 Emergency Update Instructions
    ProfiLux 3 & 3.1 Emergency Flash Tool
    the newest Firmware. you can find it in the GHCControlCenter installation directory like:
    C:\Program Files (x86)\GHLControlCenter_V1113\Firmware\ProfiLux 3

    regards Pit

    PS:The GHLControlCenter must be closed during emercency update.
    Geändert von PIWAWT (14.03.2018 um 18:33 Uhr)

Forumregeln

  • Es ist dir nicht erlaubt, neue Themen zu verfassen.
  • Es ist dir nicht erlaubt, auf Beiträge zu antworten.
  • Es ist dir nicht erlaubt, Anhänge hochzuladen.
  • Es ist dir nicht erlaubt, deine Beiträge zu bearbeiten.
  •