Hi,
I need to make up a Mini DIN (PS2) splitter so I can plug in the optical sensor and the float sensor into Level 1.
Can you tell me the pimouts on both these sensors?
Do both sensors use 4 pins or 2?
Thanks,
Brenton
Hi,
I need to make up a Mini DIN (PS2) splitter so I can plug in the optical sensor and the float sensor into Level 1.
Can you tell me the pimouts on both these sensors?
Do both sensors use 4 pins or 2?
Thanks,
Brenton
we sell ready splitter cables
Thanks Matthias.
I know I can buy them but I also need to get an extension cable as the unit is a fair way from the sensor. I figured if I knew the pinout I could make one of these also.
I purchased a standard PS/2 mouse and keyboard splitter cable with 6 pins to use for Level 1 & 2.
I plugged the splitter into Level 1 and the optical sensor into the mouse port and the float sensor into the keyboard port of the splitter cable.
The problem I have is that whatever is plugged into the mouse port works fine but anything plugged into the keyboard port of the splitter does not register at all.
I have tested both sensors and they are working correctly.
What am I doing wrong? Is the GHL splitter cable any different to a standard 6 pin PS/2 splitter cable?
Thanks,
Brenton
Yes it is and if you use something that is not made for the Profilux your hardware can be damaged. (no warranty on such experiments!)
Last edited by GHL Support; 26.12.2009 at 10:24.
Well that is why it doesnt work
I will purchase one shortly.
Bookmarks