tunze 6105 vs redox

[jjb]

the redox reading on the proflux has been reading 45mv for the last few weeks,then it dawned on me that it was when i went from a very poor closed loop system to 4 tunze 6105's the increase in flow is amazing.

Anyway when i turn off the tunzes off at the wall socket and the redox returns to normal about 330mv. turn them back on and the redox starts to drop, also if the din plugs are unpluged so the pumps end up at full power the redox starts to return to normal?

[Matthias]

do I understand correctly - if you unplug the DIN-connectors and the power is present at the same time (pumps run at full power) the readings are OK?

[jjb]

yes if the din plugs are unpluged with the power still on the tunze pumps the reading starts to go back to normal?

[Matthias]

ok, then is this a problem we had a few times in the past

some electromagnetical interferences come from the pumps through the into the ProfiLux and cause bad readings

we are aware of this and already started to develop a special electronic filter for this purpose which will be installed between the pumps and the ProfiLux

please watch our forum, we will announce when we are ready with it

[jjb]

ok thanks ,

[jjb]

have we any updates on this problem yet as i am now using the tunze controller , just so i can read a stable radox value.