Results 1 to 2 of 2

Thread: Virtual Probes and Alarms

  1. #1
    Join Date
    07.04.2017
    Posts
    157

    Default Virtual Probes and Alarms

    In the programming manual for the P4 it say in the System dropdown is where I can create virtual probes and Alarms, but on my GCC I only have "Communication, Switch channels, 1-10V and Digital input" even in expert mode. How do I find the missing features the P4 Programming manual are talking about?

  2. #2
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    The information provided in the manual is referring to the changes that you'd make on the P4 itself.

    To add a virtual probe, do the following:
    1. Press any of the arrow keys on the P4 and select SYSTEM
    2. Select VIRTUAL PROBES, then NEW VIRT. PROBE
    3. Select if you want to create a copy or create a new probe based on a probe's average readings.
    4. Select the probe to copy and save settings.

    Once you do that, you will be able to go into GCC and see the newly added probe listed as a virtual probe.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •