Results 1 to 3 of 3

Thread: LEDControl4 Version 2 and Inventronics 26w driver

  1. #1
    Join Date
    13.10.2016
    Posts
    59

    Default LEDControl4 Version 2 and Inventronics 26w driver

    Hallo

    Can the LEDControl4 Version 2 be used with Inventronics 26w driver ? http://www.ledgroupbuy.com/inventron...-driver-700ma/

    http://www.inventronics-co.com/uploa...3092790611.PDF

    The driver is dimmable. It has AC/DC and 3 wires for a potentiometer. I only whant to use 1 channel/ turn on/off and dimming function.


    Do I only have to use the DC wire ? It also have 3 wire for potentiometer : gray wire dim - GND , purble wire dim + 1-10 v , yellow vauv (10)

    Can I use the driver ?

  2. #2
    Join Date
    06.02.2012
    Posts
    2,020

    Default

    Can the LEDControl4 Version 2 be used with Inventronics 26w driver ?
    There is no reason to do so. Your ballast has a 1-10V input, so it´s no problem to connect it directly to the PL by using LBF-AP or LF-ABOX

  3. #3
    Join Date
    13.10.2016
    Posts
    59

    Default

    Okay that is easy :-) Thank you

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •