Results 1 to 4 of 4

Thread: Powerbars

  1. #1
    Join Date
    07.02.2017
    Posts
    8

    Default Powerbars

    I have 2 STDL4-4 & 1 powerbar 5.1

    The 5.1 is connected thru PAB, 1 of the 4-4 is connected thru s1/s2 (s3/s7 is used for my 3 dosing pumps).
    Now how do I connect the second 4-4?

    Can I connect it thru the dosing pump, can i use a splitter on the S1/S2, do I need to buy the expansion socket or can I connect it with my expansion box 2?

  2. #2
    Join Date
    06.02.2012
    Posts
    2,020

    Default

    Now how do I connect the second 4-4?
    This is only possible by adding S-ports via card or expansion box

    Can I connect it thru the dosing pump,
    No.

    can i use a splitter on the S1/S2,
    No.

    do I need to buy the expansion socket
    A PLM-2L4S would help
    https://store.aquariumcomputer.com/e...lm-2l4s-detail

    or can I connect it with my expansion box 2?
    If there is a free S-Port: Yes

  3. #3
    Join Date
    07.02.2017
    Posts
    8

    Default

    Ok, got the 3 powerbars working Thanks
    5.1 @ PAB, first 4-4 to port s5-s8 and second 4-4 on an extra s-port

    Now I'm trying to work out the configuration of the dosing pumps.
    They are connected to each other and then the last one to the S1-S4 port.
    Now if I let the s1 run, all the first pumps of the 3 pumps start working. Can I assign other numbers to the other pumps or do I need to connect them all to a different s-port?

  4. #4
    Join Date
    06.02.2012
    Posts
    2,020

    Default

    Can I assign other numbers to the other pumps or do I need to connect them all to a different s-port?
    Set the numbers with GCC by connecting and programming one after another to the port S1S4. It´s mandatory to set this port to digital (checkbox) for that

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •