Results 1 to 3 of 3

Thread: GCC not connecting to P4 via WiFi

  1. #1
    Join Date
    23.10.2017
    Posts
    5

    Default GCC not connecting to P4 via WiFi

    I can't get the GCC software to connect to my P4 on WiFi. it says it "Can't find a GHL Device". I set it up as a static IP, and i can ping, connect using the IP in a web browser, connect using MyGHL cloud and connect via GHL connect app on my phone. but GCC won't work! Please help.

    GCC version 1.1.0.3
    P4 Firmware 7.08
    WiFi module Firmware 6565

  2. #2
    Join Date
    23.10.2017
    Posts
    5

    Default

    Ok, I gave up on trying to get it to connect and just left the P4 running. Came back and tried it again and now it connects
    over wifi! I guess my problem solved its self.
    Last edited by lbs5015; 02.01.2018 at 00:32.

  3. #3
    Join Date
    18.12.2017
    Posts
    44

    Default

    Had similar issue. Turns out that the problem for me was the signal strength of the router I was using. Moved it closer and now it connects and stays connected

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •