Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: Assistance with connecting P4 to myGHL

  1. #1
    Join Date
    04.09.2010
    Location
    Liverpool
    Posts
    46

    Default Assistance with connecting P4 to myGHL

    Hi all,

    I appreciate that myGHL is read only at the moment, but I'm having issues connecting my P4 to myGHL at all.

    First question - what does the wifi modus mean? It's not clear what client (infrastructure) or access point actually mean?

    I believe I've managed to connect my new GHL correctly to my wifi correctly, but whatever settings I choose I can't connect to myGHL.

    Settings are as follows on the control centre:

    IMG_5400.jpg

    IMG_5399.jpg

    The P4 changes between a blue light and a while light on top (always flashing), and the led to the right of the wifi writing on the front of the P4 is constant green.

    IMG_5395.jpg

    IMG_5394.jpg

    As I mentioned the top light is always flashing blue or white (it changes between the two colours every minute or so).

    However, no matter how I change the wifi modus all I get it the following message from myGHL:

    IMG_5396.jpg

    Please help

    Thanks
    Andy

  2. #2
    Join Date
    04.09.2010
    Location
    Liverpool
    Posts
    46

    Default

    Sorry some of the pictures are upside down

  3. #3
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    Client mode allows you to connect the P4 to your WiFi network.

    Access point mode allows you to give the P4's built-in wifi hotspot a name and designate a password for this hotspot.

    In the Access point column, you can give the P4 hotspot a name and password. These are not required fields.


    Set the P4 to Client & Access point, disconnect from the P4 for 20-30 seconds, then reconnect, and see what IP address was assigned to your P4. Once you've done that, add the device to your myGHL account.

  4. #4
    Join Date
    04.09.2010
    Location
    Liverpool
    Posts
    46

    Default

    Thank you Vinny. It still took a couple of attempts before it connected but it had now worked.

    MyGHL itself doesn't seem to be working very well, timing out on places sensors not showing correctly, etc...but I think some of those problems are already known as teething problems.

  5. #5
    Join Date
    22.02.2016
    Posts
    5

    Default

    Hi,

    Just to be correct.
    Client mode : SSID needs to be the already existing SSID from my Router. Correct?
    Accespointmode : SSID can be somthing like GHLP4accespoint. Correct?

  6. #6
    Join Date
    04.11.2015
    Posts
    1,062

    Default

    Quote Originally Posted by RaymondV View Post
    Hi,

    Just to be correct.
    Client mode : SSID needs to be the already existing SSID from my Router. Correct?
    Accespointmode : SSID can be somthing like GHLP4accespoint. Correct?
    Hello Raymond,

    yes, you are absolutely correct.
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  7. #7
    Join Date
    22.02.2016
    Posts
    5

    Default

    With the above assumptions i can't login on my device via myGHL while it says that it is online.
    myGHLconnectionissue.JPG
    myGHLconnectionissue2.JPG
    Last edited by RaymondV; 01.03.2017 at 15:57.

  8. #8
    Join Date
    04.11.2015
    Posts
    1,062

    Default

    You can send us your device's information (myGHL-ID, serial number),
    so we can have a detailled view on this issue:

    support@ghl-kl.de
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  9. #9
    Join Date
    22.02.2016
    Posts
    5

    Default

    Done

  10. #10
    Join Date
    09.02.2017
    Posts
    3

    Default

    I have the same problem. I have updated firmware and has the p4 connected wireless. In myGHL the online state is greyed out. I tried everything. Sometimes the wifi LED blinks green and sometimes light constant. Most often it blinks. Is this a generel error?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •