Results 1 to 3 of 3

Thread: Profilux webserver setup (remote access) question

  1. #1
    Join Date
    19.10.2016
    Location
    winchester
    Posts
    7

    Lächeln Profilux webserver setup (remote access) question

    Hi
    I prefere the webserver setup over MyGHL because of the graphs showing trends etc
    how can i set this up for remote access?
    I have Sky Broadband and their hub that goes with it?
    I have the Profilux 3.1T ex
    Thanks in advance
    Steve

  2. #2
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    You can setup remote access to the P3 webserver by using a free dynamic DNS provider such as No-IP.

    In order to access the controller's webserver, you should first go into your router's port forwarding settings and allow the ProfiLux's IP address to have access to Port 80.

    You can find the exact steps to getting this setup here (See page 40):
    https://www.dropbox.com/s/9i4l79svjv...Guide.pdf?dl=0

  3. #3
    Join Date
    19.10.2016
    Location
    winchester
    Posts
    7

    Default

    Thanks for this, all set up now
    1 last question is where have the graphs gone?
    I cant seem to get them up on the webpage
    thanks
    Steve

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •