myGHL connection problem after changing router

[pommie]

IMG_1781.jpg

Edit * Are you referring to this ? As I can access the ghl like always have been able to like the screen shot show above but you can't change profilux settings

Thanks Pommie for responding I find networking a completely different language and I am really struggling with this.

I have a BT router smart hub, I can access the router fine I have now set a port forwarding rule under the ghl for port 81, however within the router I can two separate IP address.

TCP/iP information
86.135.103.@#£

Hub gateway iP
192.168.1.#£%
Subnet

What one do I use ?

And then secondly do I use automatic iP or do I need to fill in the manual settting in ghl software as before it was always set to auto iP.

OK, cool you have the Profilux web page and it appears you allocated an internal addres of 192.168.1.200
Now you you to substitute that with your internet IP address and see if it works.

Sorry you need to make sure you router is forward anything on port 81 to the IP address that your profilux us using i.e 192.168.1.200 and yes you should assign a static IP address.