Results 1 to 2 of 2

Thread: Vortech Controller & Vortech MP40QD

  1. #1
    Join Date
    31.08.2016
    Posts
    23

    Frage Vortech Controller & Vortech MP40QD

    Hallo!

    Ich habe einen Vortech Controller erworben und diesen mit 2 Vortech MP40QD im Einsatz. Die Steuerung und Parametrierung über das GCC funktioniert auch soweit dass ich über den Tag verschiedene Strömungsmuster ablaufen lassen kann.
    Jedoch habe ich beim Erkennen der Pumpen einige eigenartige Rückmeldungen im GCC
    Vortech GCC.PNG

    Die beiden Pumpen werden mit der Firmwareversion 0. , dem Typ unbekannt, Status na und Seriennummer 255-001-0001255 erkannt.
    Ich kann auch nach der Anleitung kein Firmwareupdate der Pumpen machen.

    Gibt es hier irgendeinen Kniff oder Trick wie ich die Pumpen richtig erkennen und die FW updaten kann?
    Oder ist hier ein SW-UPdate notwendig?


    Ich hatte bereits hier im Forum im EN Teil einige Einträge gefunden wurde aber auch nicht wirklich schlau.
    Ich habe auch ein Mail an Ecotech Marin geschrieben:

    Hi everybody,

    I have purchased 2 MP40 QD and a Vortech Interface (from GHL) to controll the pumps with my GHL. The time control of diferrent modes works rather good and I am happy with that.
    But the GHL Vortech Interface does not show the pump name (it says unkown) and the serial numbers are not displayed. Futhermore I am not able to run a Firmwareupgrade since I do not get the pumps (MP40QD) in the correct mode. After 2 min the GHL application stops and nothing happens.

    I have read in the GHL forum that there may be some newer driver for the GHL-Vortech Interface.

    Do you have this driver for me or a description how to see the correct Pump name in the settings?


    Would be nice to hear from you soon!

    kind regards


    Ich habe auch innerhal kurzer Zeit ein Antowrt bekommn die sagt ich solch mich bei GHL melden.
    Also irgendwer muss j schon zuständig sein!?
    Antwort von Ecotech Marin:

    Markus,

    Thank you for contacting EcoTech Marine and I apologize for the delay in my response. We had some issues with our email server over the weekend and I'm only now receiving your email. That said, you will need to contact GHL for support when controlling your pump via their software.

    Thanks again,
    Alex



    Mit der Bitte um Klärung und Abhilfe für mein Problem!-


    Danke & Gruss
    Markus

  2. #2
    Join Date
    13.08.2010
    Posts
    4,150

    Default

    Hallo Markus
    Es gibt zweierlei Updates, eines für die Pumpe selbst, das andere für das Interface. Ich gehe davon aus, dass die Firmwareversionen sich nicht "verstehen". Bring beide bitte auf den aktuellen Stand.
    Eine Anleitung für das Update findest du hier. Die Firmware für den Controller findest du im Installationsverzeichnis des GHLControlCenters im Unterverzeichnis
    \Firmware\PAB-Devices
    und \GHLControlCenter_V1090\VorTechFiles
    Die Firmware für die Pumpe gibt es u.a. bei Ecotech


    Gruss Pit
    Last edited by PIWAWT; 18.01.2017 at 00:11. Reason: Quelle hinzugefügt

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •