Results 1 to 4 of 4

Thread: Profilux 3.1T aktuelle Firmware?

  1. #1
    Join Date
    12.01.2015
    Posts
    60

    Default Profilux 3.1T aktuelle Firmware?

    Ich habe ein 3.1T mit firmware 6.12. Ich habe jetzt 2 probleme:

    -Computer zum Profilux:
    Wenn ich mein Profilux 3.1T an MacBook Pro (iOS 10.12.1 Sierra) anschließe und Parallels(11) mit Windows10 Education starte. Danach GHL Control Center 1088 aktivere gibt es "could not connect".
    Aber wenn ich mein Profilux 3.1T an einer Windows7 ( DELL) Maschine hänge und 1088 starte wirkt es.

    Was ist das Problem??

    -Wen ich auf der DELL (Windows7), GHL CC V1088 starte und connect mit dem Profilux (firmware 6.12) sagt er das es neue firmware gibt. Wenn ich dann zum "extras"/"firmwareupdate" gehe. Nach "Firmware" und dann Profilux3_V629.mhx, selektiere und auf "run" klicke sehe ich eine Fehlermeldung: " This file is unsuitable for updating this device!"

    Was ist das Problem?

    Vielen dank für Auskünfte

    Coen
    Niederlande (Veruntschuldigingen für mein Deutsch)

  2. #2
    Join Date
    13.08.2010
    Posts
    4,150

    Default

    Hallo Coen
    Du verwendest aber schon die Funktion "extras_Firmwareupdate" für den Profilux (links) und nicht den für PAB (mitte)

    Gruss Pit

  3. #3
    Join Date
    12.01.2015
    Posts
    60

    Default

    Quote Originally Posted by PIWAWT View Post
    Hallo Coen
    Du verwendest aber schon die Funktion "extras_Firmwareupdate" für den Profilux (links) und nicht den für PAB (mitte)

    Gruss Pit
    Bin ich aber blöd .. du hast recht! Das 2e Problem ist geklärt. Jetzt das erste (mit dem MAC un parallels) noch

  4. #4
    Join Date
    13.08.2010
    Posts
    4,150

    Default

    Ich kenne mich mich mit Mac nicht so aus, aber stimmt denn unter Parallels die Schnittstelle (USB/Com) mit den Verbindungseinstellungen im GHL ControlCenter überein?

    Gruss Pit

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •